- MFR #
- 2ZWZ7
- Zoro #
- G1634455
- UPC #
- 190735242353
- Country of Origin
- India
- HP - Pumps
- 1/2 hp
- Voltage - Pumps
- 208 to 240/480V AC
- Phase - Pumps
- 3
- Housing Material - Pumps
- Bronze
- Max. Head
- 82 ft
- Max. Pressure - Pumps
- 35 psi
- Motor Enclosure - Pumps
- Open Dripproof
- Item - Straight Centrifugal Pumps
- Straight Centrifugal High Head Pump
- GPM of Water @ 60 Ft. of Head
- 21
- Includes
- Manual
- GPM of Water @ 20 Ft. of Head
- 39
- Motor Type
- ODP
- Inlet
- 1-1/4"
- Port Rotation
- 4 Position Increments
- Motor RPM
- 3,450 RPM
- GPM of Water @ 25 Ft. of Head
- 37
- GPM of Water @ 70 Ft. of Head
- 15
- GPM of Water @ 10 Ft. of Head
- 42
- Seal Material
- Viton
- Bearing Type
- Ball
- Impeller Material
- Stainless Steel
- Housing Material
- Bronze
- Agency Compliance
- UL Approval in Motor
- Amps
- 1.8-1.7/0.9
- Inlet Pressure
- 200 psi
- Motor Enclosure
- Open Drip Proof
- HP
- 1/2
- Voltage
- 208-230/460VAC
- Best Efficiency GPM @ Head
- 29 @ 47 ft
- Outlet
- 1"
- GPM of Water @ 50 Ft. of Head
- 28
- Impeller Type
- Closed
- Max. Specific Gravity
- 1.0
- Duty
- Continuous
- Phase
- Three
- Item
- Centrifugal Pump
- Hz
- 60
- Max. Liquid Temp.
- 200 Degrees F
- Max. Case Pressure
- 200 psi
- GPM of Water @ 30 Ft. of Head
- 36
- Frame
- 56J
- GPM of Water @ 15 Ft. of Head
- 40
- Max. Pressure
- 35 psi
- GPM of Water @ 40 Ft. of Head
- 32
- Wetted Materials
- Bronze, Brass, Viton, Carbon, Ceramic, 316 SS
- Standards
- UL Recognized Motor
- Motor Frame Designation
- 56J
- Compatible with Media Type
- Non-Flammable Liquids
- Intake Type
- NPT
- Maximum Feet of Head
- 82 ft
- Impeller Design
- Closed
- Flow Rate @ 30 ft of Head (Maximum)
- 42 gpm
- Discharge Type
- NPT
- Flow Rate @ 40 ft of Head (Maximum)
- 36 gpm
- Nameplate Voltage
- 230/460V AC
- Minimum Media Temperature
- 40 Degrees F
- Feet of Head (Minimum)
- 10 ft
- Best Efficiency Head
- 47 ft
- Flow Rate @ 50 ft of Head (Maximum)
- 25 gpm
- Frequency
- 60 Hz
- Pumping Application
- Booster Services, Irrigation, Jockey Pump Services, Spraying Systems, Water Circulation
- Discharge Rotation
- 90 Degrees Increments
- Maximum RPM
- 3,450 RPM
- Wetted Material
- 316 Stainless Steel, Brass, Bronze, Carbon, Ceramic, Viton
- Pump Housing Material
- Bronze
- Maximum Media Temperature
- 200 Degrees F
- Shut Off Pressure (Maximum)
- 35 psi
- Shaft Material
- Stainless Steel
- Specific Gravity (Maximum)
- 1
- Horsepower
- 1/2 hp
- Seal Type
- Mechanical
- For Use With Potable Systems
- No
- Flow Rate @ 20 ft of Head (Maximum)
- 50 gpm
- Best Efficiency Flow
- 29 gpm
- Flow Rate @ 10 ft of Head (Maximum)
- 42 gpm
- Duty Cycle
- Continuous
- Volute Material
- Bronze
- Number of Stages
- 1
- Shaft Seal Material
- FKM
- Viscosity (Maximum)
- 100 SUS
- Discharge Rotation Increments
- 0 Degrees
- Media Temperature - Maximum
- 200 Degrees F
- Shut Off Pressure - Maximum
- 35 psi
- Feet of Head (Maximum)
- 82 ft
- Hazardous Location Class
- Not Rated
- Shaft Seal Type
- Mechanical
- Drive Coupling Type
- No Coupling
- Priming
- Manual
- Motor Speed - Maximum
- 3,450 RPM
- Ambient Temperature - Maximum
- 40 Degrees C
- Case Pressure - Maximum
- 100 psi
- Electrical Connection Type
- Hardwired
- Chemical Compatibility
- Non-Flammable Liquids
- Discharge Orientation
- Top
- Discharge Position
- Offset
- Media Temperature - Minimum
- 40 Degrees F
- Inlet Orientation
- Side
- Inlet Position
- Center
- Thermal Overload Protection
- Yes
- Full Load Current
- 1.7/0.9 A
- Mounting Orientation
- Horizontal
- Flow Rate @ 10 ft of Head - Maximum
- 42 gpm
- Flow Rate (Minimum)
- 25 gpm
- Flow Rate (Maximum)
- 52 gpm
- Motor Design
- Three-Phase
Create Account