Wedged Cogged V-Belt, Power Ace Cog, 5VX670, 5VX, Rubber, 67 in, 5/8 in Top Width

The DAYTON - 2L425 is a Cogged, Wedge V-Belt designed for general industrial applications. This belt is part of the Power Ace Cog series and has a trade size of 5VX. It's constructed from gum rubber with a fabric cover and polyester cords, which are intended to enhance its durability, flexibility, and resistance to environmental factors such as heat and chemicals.

Key Features of the DAYTON - 2L425 V-Belt:

• Belt Material: The belt is made from Gum Rubber with Fabric Cover and Polyester Cords providing durability, flexibility, and resistance against environmental factors.
• Construction: Raw Edge, Cogged construction is designed for potential improvement in power transmission efficiency by enhancing grip on pulleys.
• Operating Temperature Range: With a minimum operating temperature of -22 Degrees F and maximum operating temperature of 194 Degrees F, this belt is rated for operation within these temperature ranges.
• V-Belt Section: Classified under the "5VX" section indicating its dimensions compatibility with certain machinery in industrial settings.
• Resistance Properties: Designed with properties that may resist Heat; Oil potentially making it suitable for certain harsh working conditions. Also has static conductive characteristics
• Tensile Strength: Has a reported tensile strength value of 5,900 N/mm which may indicate high load-bearing capacity
• Outside Length & Top Width: Measures an outside length of 67 inches along its outer perimeter intended for fitting within specified machinery drive systems. Its top width measures at 5/8 inch which could be important when considering compatibility with various equipment