Push on Hose Fitting, 3/4"x3/4", BarbxNPTF

The DIXON - 2741212C is a rigid Push-On Hose Fitting, prominently used for routing or connecting inline hose lines in industrial applications. This fitting is of a straight shape, which contributes to seamless hose connections. It's primarily constructed from Brass, delivering a balance of strength and resistance against corrosion. The fitting enables Hose Barb x NPTF connection type and is of Barb X Thread style, with both Hose Fitting A (male) and Hose Fitting B (female) sized at 3/4 inches each. This fitting is not reusable and is designed to work with a hose ID of 3/4 inch. Another distinguishing feature of this fitting is the Hex Head Size of 1 3/16 inches, specifying the wrench or socket size needed for tightening or loosening the fitting.

Key Features:

• Fitting Material: Brass x Brass, denoting the primary material used in the manufacture of this fitting and any distinct mating components.
• Barb Size: 3/4 inch, illustrating the diameter of the barb end.
• Fitting Shape: Straight, indicating the geometric configuration of the fitting.
• Fitting Movement: Rigid, meaning it does not permit any motion or flexibility between components.
• Hex Head Size: 1 3/16 inches, identifying the required size of wrench for this particular fitting.
• Max. Working Pressure @ 70 F: 350 psi, the maximum pressure this fitting can withstand during normal operation at 70F.
• Fitting Size: 3/4 inch x 3/4 inch, specifying the size of both A (male) and B (female) hose fittings.
• Thread Size: 3/4"-14, specifying the corresponding size of the screw or nut the fitting can be used with.
• Material Grade: C36000, indicating the specific grade of Brass used in the production of this fitting.
• Thread Type: NPTF, highlighting the National Pipe Taper Fuel identification for this particular fitting.