E-Z Ancor Screw Anchor, 1-1/4" L, Nylon

EZ Ancor Twist-N-Lock drywall anchors are rated at 50 lbs. for holding products that hang flush to the wall. This rating is per job, not per anchor. Using additional anchors does not incrementally change the weight that can be supported. Using #2 Phillips screwdriver, press anchor tip slightly into drywall. Applying pressure, turn anchor flush with the drywall. Do not over tighten. Insert screws through item to be hung and turn into an anchor. The anchor will "click" once when the screw is halfway in to indicate that the anchor is secure. Continue tightening until flush. Item thickness 1/4 in. or less with screw provided.

• • No pre-drilling necessary - drills directly into drywall
• • Made with high–strength fiber-reinforced resin for superior durability
• • Do not use for mounting televisions
• • Splits and grips for a strong hold that won't back out
• • Installs flush against the wall to prevent items from wobbling
• • Creates a smaller hole than competitive anchors for easier installation, cleanup and removal