Federal Signal 52-024-1 Horn, 24VDC, Resonating

THE FEDERAL SIGNAL MODEL 52 RESONATING HORN PRODUCES 114DBA @ 10 FEET (124DBA @ 1M) WITH A 1,000 FOOT RANGE. IT IS CAPABLE OF PENETRATING HIGH AMBIENT NOISE LEVELS. BEING ELECTRICALLY-ACTIVATED, THE MODEL 52 DOES NOT REQUIRE AN AIR COMPRESSOR FOR OPERATION. THE MODEL 52 IS ABLE TO WITHSTAND THE SHOCKS, VIBRATIONS, DUST AND ATMOSPHERIC CONDITIONS ENCOUNTERED IN OFF-ROAD USE. THE OPERATING TEMPERATURE RANGE IS -40°F TO 185°F (-40°C TO 85°C). RUBBER GASKETS AND A POWER CONNECTOR MAKE THE MODEL 52 COMPLETELY WATERTIGHT. THE PROJECTOR AND INTERNAL PARTS ARE MADE OF ZINC-COATED STEEL OR STAINLESS STEEL TO RESIST CORROSION; THE EXTERIOR IS SEALED WITH GRAY ENAMEL PAINT. THE HOUSING IS DIE-CAST ALUMINUM. TIED AND ADHESIVE-BONDED INTERNAL WIRING HELPS PREVENT ELECTRICAL SHORTS, WIRE BREAKAGE, AND LOOSE CONNECTIONS. THE MODEL 52 IS AVAILABLE IN 24VDC. IT'S 18-32V OPERATING RANGE ALLOWS FOR VOLTAGE INCONSISTENCIES. THE MODEL 52 HAS A DUTY CYCLE OF FIVE MINUTES ON AND FIVE MINUTES OFF. FEDERAL SIGNAL'S MODEL 52 RESONATING HORN IS SPECIFICALLY DESIGNED FOR OFF-ROAD VEHICLES. IT PROVIDES THE VERY LOUD SOUND FOR WHICH AN AIR-HORN IS USUALLY REQUIRED, BUT WITHOUT THE NEED FOR AN EXPENSIVE COMPRESSOR. USED BY MAJOR MANUFACTURERS OF CONSTRUCTION EQUIPMENT, MODEL 52 RESONATING HORNS SUIT THE WARNING NEEDS OF ANY OFF-ROAD VEHICLE WORKING IN A HIGH NOISE ENVIRONMENT, INCLUDING EXCAVATORS, BACKHOES, COMPACTORS (STEAMROLLERS), LOADERS, TRACTORS, BULLDOZERS, TRENCHERS, AND SCRAPERS.