Promotion Restriction
|
Not eligible for promotion
|
Item
|
Tone and Probe Kit
|
For Use With
|
Telephone Jacks
|
Primary Function
|
Copper Cable Tracing (Tone & Probe Kit)
|
Instrument Display
|
None
|
Connector Type
|
RJ11
|
Includes
|
60 Hz Filter, Carrying Case
|
Adapter Type
|
RJ11, RJ45
|
Special Features
|
(5) Different Cadence, Tones Up to 10 Miles
|
Calibration Certificate
|
Not Included
|
Endpoint Testing
|
Yes
|
Impedance Detection
|
No
|
Tone Generator
|
Yes
|
Wiremapping
|
No
|
Eithernet Service Detection
|
Yes
|
WiFi Capability
|
No
|
Pair Tracing
|
Yes
|
Opens/Shorts Detection
|
No
|
Cable Certification
|
No
|
Crosstalk Detection
|
No
|
Endponit Testing
|
Yes
|
Data Line Polarity Indicator
|
No
|
Cable Speed Qualification
|
No
|
Telephone Service Detection
|
Yes
|
Ethernet Service Detection
|
Yes
|
Service Detection
|
No
|
Distance to Fault
|
No
|
Continuity Testing
|
Yes
|
Tone Detection
|
Yes
|
PoE/PoE+ Detection
|
No
|
Data Safe Monitor
|
No
|
Waterproof
|
No
|
Output Amplitude
|
8 V DC
|
Product Type
|
Tone Generator and Probe Kit
|
Solid Frequency
|
1000 Hz nominal
|
Alternating Frequency
|
1000/1500 Hz nominal
|
User interface
|
Tone mode LED || Slide switch selects Continuity or Tone Mode || Push button switch selects SOLID, ALT or OFF || Continuity/Polarity LED, Volume dial || ON/OFF push button || 3. 5 mm earphone jack || Replaceable tip
|
Over Voltage Protection
|
60 Vdc in Toner/Polarity Mode
|
Battery
|
9V alkaline
|
Output Voltage Level in Continuity Mode
|
8 Vdc with fresh battery
|
Output Power in Tone Mode
|
8 dbm into 600 ohms
|
Temperature
|
Operating: -20° C to 60° C, Storage: -40° C to 70° C
|
Additional Information
|
Pro 3000 Toner Specifications: User Interface: Slide Switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT, or OFF Tone mode LED Continuity/Polarity LED, Solid Frequency: 1000 Hz nominal, Alternating Frequency: 1000/1500 Hz nominal, Over Voltage: Protection/td> 60 Vdc in Toner/Polarity Mode, Output Power in Tone Mode: 8 dbm into 600 ohms, Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery, Battery: 9V alkaline, Temperature: Operating: -20°C to 60°C, Storage: -40° to 70° C, Dimensions: 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) Pro3000F Filtered Probe Specifications: User Interface: ON/OFF button (Push 1 second to activate, Press to turn off, Auto-off after 5 minutes) Filtered/Unfiltered Mode Button with LED (Green = Filtered, Red = Unfiltered) Volume dial Replaceable tip 3.5 mm earphone jack, Frequencies filtered: Pro3000F60 Probe: 60 Hz and its harmonic frequencies Pro3000F50 Probe: 50 Hz and its harmonic frequencies, Battery: 9V alkaline, Temperature: Operating: -20° C to 60° C, Storage: -40° to 70° C, Dimensions: 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)
|
Package Contents
|
Pro3000F Filtered Probe (60 Hz) and Tone Generator Kit, Nylon Pouch
|
Product Line
|
Pro3000
|
Product Name
|
Pro3000F Filtered Probe (60 Hz) and Tone Generator Kit
|
Device Function
|
Cable Signal Testing, Telephone Cable Testing, Short Circuit Testing, Open Circuit Testing, Continuity Testing
|
Battery Chemistry
|
Alkaline
|
Adapters Included
|
RJ11
|
Maximum Impedance Measured
|
600 ohm
|
Data Logger
|
No
|
Port Number Display
|
No
|
Maximum Operating Temperature
|
140 Degrees F
|
Minimum Operating Temperature
|
-4 Degrees F
|
Wire Mapping Detections
|
Opens, Shorts
|
Display Screen Type
|
LED
|
Includes Batteries
|
Yes
|
Testing Functions
|
Tone Detection, Tone Generation
|
Alert Type
|
Light
|
User interface (Probe)
|
ON/OFF push button Volume dial Replaceable tip 3.5 mm earphone jack
|
User interface (Toner)
|
Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED
|