HHIP 2/0 SPIRAL FLUTE HIGH SPEED STEEL TAPER PIN REAMER (2006-2127)

HHIP 2/0 Spiral Flute High Speed Steel Taper Pin Reamer Spiral flute taper pin reamers are used to turn a straight hole into a tapered hole for standard taper pins. They are generally used by hand but can also be used with a machine. Recommended for applications where the reamer tends to wedge itself. The square on the end of the shank of the reamer is suitable for holding it in a tap wrench or vise. The free cutting action at high speeds produces a good finish and minimizes chip packing in the flutes. Shank diameter is 5/32, small end diameter is .1137 & large end diameter is .1462. Flute length is 1-9/16 and overall length is 2-9/16.