Factory Key Anti-theft transponder bypass that allows remote start installations FIRSTECH

This bypass module is intended for use on most vehicles that utilize a transponder based anti-theft system.An additional key will be required from the customer.This transponder antenna loop is adjustable and is used for vehicles that require stricter toleranceson loop size and placement. Being fixed in size, the normal antenna loops can make it difficult tomaintain placement of the loop after the steering column is reconstructed. Vehicle makes such asBMW, Mercedes, and VW require the ring placement to be exact and any movement afterwards cancause failure some vehicles even require that the loop be wound flat against the ignition cylinder.With the v.2 adjustable loop, many different configurations with varying loop counts, loop diameters,and loop placement,can be tried to fall within the vehicles tolerances. While the exact answer forcount, diameter, and placement may not be known, the v.2 loop gives you the ability to try an infinitenumber of configurations.This loop is adjustable in size and can be molded into many different configurations in an attempt to satisfythe vehicles tolerances. You will have to experiment with different loop sizes, how many coils are in theloop, and with loop placement as well. While it is a trial and error process, this adjustability allows it to workwith many different vehicles that may not have been compatible with other transponder bypass systems.