2545E10-V 10 HP Air Compressor, 120 Gallon, 2 Stage

The 2545E10-V is a stationary, tank-mounted electric air compressor designed for continuous-duty industrial service. The Ingersoll-Rand 10 hp air compressor motor is paired with a two-stage reciprocating pump, mounted on a 120-gallon horizontal ASME-approved receiver tank. The unit is engineered for a 15,000-hour life expectancy and delivers a consistent 35.0 CFM at a maximum operating pressure of 175 psi.

Pump and Performance Engineering:

• The 2545 pump is a cast-iron, simplex-style unit that operates at a maximum speed of 1,050 RPM. It utilizes a splash-lubrication system with a 2.3-quart oil capacity and an integrated oil sight glass for fluid monitoring. The two-stage compression process is governed by a pressure switch factory-set to an On/Off range of 135 to 175 psi. Electrical and Motor Specifications:
  • Motor Type: 10 HP Open Dripproof (ODP) motor with a NEMA 1 enclosure rating.
  • Power Requirements: 230V–240V AC, 3-Phase, 60 Hz.
  • Current Draw: 27 Amps.
  • Starter: Includes a pre-wired magnetic motor starter.
  • Construction and Safety
  • Tank Design: 120-gallon horizontal tank, powder-coated and compliant with ASME and California Code standards.
  • Standard Hardware: Equipped with a manual drain valve, pressure gauge, and a pressure safety valve (PSV).
  • Pneumatic Connection: 3/4-inch Female NPT (FNPT) outlet and 3/4-inch inlet.
  • Acoustics: Operating sound level is rated at 83 dBA measured at three feet.