Bond Safe Water Bonding Kit Skimmer Install

Features -First drill a 3/16 inch hole in the rear of the skimmer casing where the skimmer basket is held -Locate the bonding plate as close to the bottom of the skimmer casing as possible allowing for enough room inside of the skimmer for the bonding plate -Place the rubber washer on the base of the threaded stud on the bonding plate -Push threaded stud through the 3/16 inch hole previously drilled -Secure with a flat washer lock washer and nut in that order -Use the 2nd flat washer 2nd lock washer and 2nd nut to secure the bonding lug -Last connect solid copper wire not smaller than no. 8 AWG to the bonding lug -The copper wire should also connect to motor and all metal parts of the swimming pool within 5 ft. of the inside wall of the swimming pool