2,000+ Results for Media Converters & Data Adapter Kits - Page 18
Key Features:
- Baudrate: 50 bps to 921.6 kbps
- Ambient Relative Humidity: 5 to 95% (non-condensing)
- RS-422 Signals: TxD+, TxD-, RxD+, RxD-, GND
Key Features:
- Time: 514,926 hrs
- RS-232 Signals: TxD, RxD, GND
- Ring Transmission: Half-duplex
Key Features:
- Standards: MIL-HDBK-217F
- EMI: CISPR 32, FCC Part 15B Class A
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Key Features:
- Standards: IEEE 802.3 for 10BaseT; IEEE 802.3u for 100BaseT(X) and 100BaseFX; IEEE 802.3ab for 1000BaseT(X); IEEE 802.3z for 1000BaseSX/LSX/LX/LH/LHX/ZX/E2X
- Input Voltage: 12 to 45 VDC redundant inputs
- EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
Key Features:
- Standards: MIL-HDBK-217F
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Safety: EN 60950-1, UL 60950-1
Key Features:
- Standards: IEEE 802.3 for 10BaseT; IEEE 802.3u for 100BaseT(X), 100BaseFX
- Ambient Relative Humidity: 5 to 95% (non-condensing)
- Time: 1,454,560 hrs
Key Features:
- Database: Telcordia (Bellcore), GB
- Ring Transmission: Half-duplex
- Isolation: 2 kV RMS isolation per I/O port for 1 minute
Key Features:
- Tx Output: Single-mode: > -5 dBm; Multi-mode: > -5 dBm
- Baudrate: 50 bps to 921.6 kbps
- Fiber Connector: SC or ST
Key Features:
- Standards: MIL-HDBK-217F
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
Key Features:
- Power Consumption: ICF-1150: 127 mA @ 12 V; ICF-1150I: 163 mA @ 12 V
- Wavelength: ICF-1150-S (single-mode): 1310 nm; ICF-1150-M (multi-mode): 850 nm
- Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 EEx nC IIC, IECEx
Key Features:
- Standards: IEC 61158-2 for PROFIBUS DP
- Over Current Protection: 1.1 A
- Relay Alarm: One relay output with current carrying capacity of 2 A @ 30 VDC (Normal open)
Key Features:
- Over Current Protection: 1.1 A (protects against two signals shorted together)
- Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2 EEx nC IIC, IECEx
- RS-422 Signals: TxD+, TxD-, RxD+, RxD-, GND
Key Features:
- Standards: MIL-HDBK-217F
- Installation: DIN-rail mounting
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
Key Features:
- Housing: Aluminum
- EMC: CE, FCC
- Safety: UL 508, LVD
Key Features:
- Number of Slots: 19 slots in the front for slide-in modules, 2 slots in the back for power supply modules
- Input Voltage: Universal 100 to 240 VAC (47 to 63 Hz) or 36 to 72 VDC
- EMC: CE, FCC
Key Features:
- Standards: IEC 61158-2 for PROFIBUS DP
- Over Current Protection: 1.1 A
- EMI: EN 55022, Class A; EN 55024
Key Features:
- Standards: MIL-HDBK-217F
- Input Current: 150 mA @ 20 to 72 VDC
- EMI: CISPR 32, FCC Part 15B Class A
Key Features:
- Standards: MIL-HDBK-217F
- Power Connector: Terminal block
- Input Current: 200 mA @ 12 to 45 VDC
Key Features:
- Standards: MIL-HDBK-217F
- IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
- Housing: Metal
Key Features:
- Storage temperature: -40 to 85°C (-40 to 185°F)
- Time: 792,085 hrs
- Water and Dust Proof: IP30
Key Features:
- Storage temperature: Standard Models: -20 to 75°C (-4 to 167°F); Wide Temperature Models: -40 to 85°C (-40 to 185°F)
- Dimensions: UPort 404: 80 x 35 x 130 mm (3.15 x 1.38 x 5.12 in); UPort 407: 100 x 35 x 192 mm (3.94 x 1.38 x 7.55 in)
- Database: Telcordia (Bellcore), GB
Key Features:
- Standards: IEEE 802.3 for 10BaseT; IEEE 802.3u for 100BaseT(X), 100BaseFX
- EMI: CISPR 32, FCC Part 15B Class A
- Dimensions: 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in)
Key Features:
- Power Consumption: ICF-1150: 127 mA @ 12 V; ICF-1150I: 163 mA @ 12 V
- Voltage Reversal Protection: Protects against V+/V- reversal
- RS-485-4w Signals: TxD+, TxD-, RxD+, RxD-, GND
Key Features:
- Cable Requirements: Single-mode: 8.3/125, 8.7/125, 9/125, or 10/125μm; Multi-mode: 50/125, 62.5/125, or 100/140μm
- Freefall: IEC 60068-2-32
- Dimensions: 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Key Features:
- Adapter Type: RJ-45
- Connector Type on Second End: DB-25 - Male
- Connector on Second End Details: 1 x 25-pin DB-25 Male
Key Features:
- Wavelength: ICF-1150-S (single-mode): 1310 nm; ICF-1150-M (multi-mode): 850 nm
- EMI: EN 55022 Class B, FCC Part 15 Subpart B Class B
- RS-422 Signals: TxD+, TxD-, RxD+, RxD-, GND
Key Features:
- Standards: IEC 61158-2 for PROFIBUS DP
- EMI: EN 55022, Class A; EN 55024
- P3 Port: PROFIBUS DP (DB9 female)
Key Features:
- Storage temperature: -40 to 85°C (-40 to 185°F)
- Isolation: 2 kV RMS isolation per I/O port for 1 minute
- Input Voltage: 12 to 48 VDC
Key Features:
- Width: 3.1 in
- Height: 1 in
- Size: Maximum frame size of 2048 bytes
Key Features:
- Bit Error Rate (BER): <10-12
- Current: 167 mA
- Fiber link on / Receive activity (LKF): This green LED is operational only when power is applied. The LED is on when the 100Base-FX link is on and flashes with a 50% duty cycle when data is received.
Key Features:
- Height: 0.9 in
- Width: 6.9 in
- Depth: 5.7 in
Key Features:
- Configuration Mode (Strap): Auto (default) enable management module to overwrite hardware switch settings; Switch - Use onboard DIP switches
- Remote Loopback #2: The media converter can perform a loopback on the link #2 fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. Link #1's fiber transmitter is taken off the interface.
- Operating Humidity: 5% to 90% non-condensing
Key Features:
- Size: Maximum frame size of 2048 bytes
- Power Over Ethernet (PSE): PoE models: maximum to 15.4 watts supplied to port; PoE+ models: up to 30 watts supplied to port
- Storage Humidity: 5% to 95% non-condensing
About Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are used to convert data signals between different types of media, such as coaxial cables, twisted pair cables, and fiber optic cables. These kits allow for the transmission of data over long distances while maintaining the integrity of the signal.
Types of Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits come in a variety of forms and configurations depending on the type of media being converted. Different kits may have different components that support various protocols or have different power requirements. Some kits also provide additional features such as signal amplification or frequency conversion.
How Media Converters & Data Adapter Kits are Made
Media Converters & Data Adapter Kits are typically constructed with components like transceivers, connectors, power supplies, and circuit boards. They are designed to be compatible with multiple communication protocols and can often be customized for specific applications.
Industries that use Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are commonly used in a variety of industries including telecommunications, aerospace engineering, automotive manufacturing, and medical device production. Professionals in these fields rely on these kits to enable efficient data transmission across long distances.
Find the Media Converters & Data Adapter Kits You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.