Cm-100-S2St80 Media Converter

Mfr # 05052340
Zoro # G4407550

$2,757.99

Free Shipping & Returns

Key Features

Edge Connecter

32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power

Auto-MDIX (Strap)

If Auto-Negotiation (802.3u) is enabled, the media converter uses the HP Auto-MDIX method for the 100Base-TX interface. If Auto-Negotiation (802.3u) is disabled the Media converter will use the RX Energy method on the 100Base-TX interface to set the port MDI or MDIX whichever is appropriate; Enabled (Default)- Either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable; Disabled- If the partner device on the other end of the cable does not have the Auto-MDIX feature a specific cable, either a straight-through or crossover will be required to ensure that the media convertor's transmitter and the partner devices transmitter are connected to the others receiver. The Media Convertor's 100Base-TX port is configured as MDI with this switch setting.

Auto-Negotiation (802.3u)

Enabled (Default)- The media converter uses 802.3u Auto-negotiation on the 100Base-TX interface. It is set to advertise full duplex; Disabled- The media converter sets the 100Base-TX port to full duplex.

Maximum Power Consumption ( Watts )

Configuration Mode (Strap)

Auto (default) enable management module to overwrite hardware switch settings; Switch - Use onboard DIP switches

See all product information

Get a 10% off coupon

Free 30-day returns

Return Policy

Get 30 days to pay with Net 30

Apply Now

Real support from real people

Contact our U.S. based team

Specifications

Product Information

MFR #

05052340

Zoro #

G4407550

UPC #

734660523400

Country of Origin

Canada

Details

Edge Connecter

32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power

Auto-MDIX (Strap)

Auto-Negotiation (802.3u)

Maximum Power Consumption ( Watts )

Configuration Mode (Strap)

Auto (default) enable management module to overwrite hardware switch settings; Switch - Use onboard DIP switches

Operating Humidity

5% to 90% non-condensing

Storage temperature

minimum range of -25 C to 70 C (-13 F to 158 F)

Fiber link on / Receive activity (LKF)

This green LED is operational only when power is applied. The LED is on when the 100Base-FX link is on and flashes with a 50% duty cycle when data is received.

Emissions

FCC Part 15 Class A, EN55022 Class A

Card insertion and removal

Captive thumb screws enable fast insertion and removal. Can be further tighten with a screwdriver.

Link Pass Through

Enabled (Default)- When the state of the receiver is changed on the 100Base-TX interface it is reflected on the 100Base-FX fiber transmitter. When the state of the receiver on the 100Base-FX interface is changed it is reflected on the 100Base-TX transmitter; When a Far-End Fault Indication is received on the fiber interface the 100Base-TX transmitter is turned off. When the Far-End Fault Indication is cleared the transmitter is turned back on; Disabled- The 100Base-TX and the 100Base-FX fiber interface operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the 100Base-TX interface.

Immunity

EN55024

Remote Loopback

The media converter can perform a loopback on the 100Base-X fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. The 100Base-TX transmitter is taken off the interface.

Fiber Optic Cable

Single mode dual ST Media Converters; Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITU-T 625)

Laser Safety

EN 60825-1:2007

Pause

Pause should be enabled when all devices connected to the media converter support pause. Auto-Negotiation must be Enabled to use this feature; Enabled (Default)- The Media converter will advertise Pause capability during Auto-Negotiation on the 100Base-TX interface; Disabled- The Media converter will advertise that it does not have Pause capability during Auto-Negotiation on the 100Base-TX interface.

100Base-TX

RJ45 connector, 2 pair CAT 5, EIA/TIA 568A/B or better cable

Copper link on / Receive activity (LKC)

This green LED is operational only when power is applied. The LED is on when the 100Base-TX link is on and flashes with a 50% duty cycle when data is received.

Heat Output ( BTU/HR )

6.8

Magnetic Isolation

1.5kv

Power / TST

This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.

Operating temperature

0 C to 50 C (32 F to 122 F)

Electrical Safety

UL 60950-1

Operating Altitude

Up to 3,048 meters (10,000 feet)

Bit Error Rate (BER)

<10-12

Storage Humidity

5% to 95% non-condensing

Description

CM-100-S2ST80 - Managed Fast Ethernet Media Converter Module: 100BASE-TX (RJ-45) [100 m/328 ft.] to 100Base-ZX 1550nm single mode (ST) [80 km/49.7 miles]. Managed or unmanaged operation

Restrictions

WARNING: Cancer and Reproductive Harm For more information go to www.P65Warnings.ca.gov

Ratings & Reviews

3 Reasons You Can Count On Us

Supplies for every job.

10 million items and the exact one you need.
When you need it fast, count on Zoro!

2 million products ship in 1 day.
Stretch your budget further.

Everyday low prices on the brands you love.

Special Deals

Cm-100-S2St80 Media Converter

Mfr # 05052340

Zoro # G4407550

Key Features

Customers Also Purchased

Specifications

Product Information

Details

Description

Restrictions

Ratings & Reviews

3 Reasons You Can Count On Us

Supplies for every job.

When you need it fast, count on Zoro!

Stretch your budget further.

Explore More Products