1-1/2 in. Steel Ball Bearing Sliding Door Roller Assembly Single Pack

This is an F-tab patio door roller assembly with a 1-1/2 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 inch wide with a 3/4 inch flare, 1-1/16 inch tall and a rear adjusting screw. Used by King Mirror and a variety of other patio door manufacturers.

• •Used by a variety of metal sliding patio door manufacturers
• •As the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together
• •1-1/2 inch diameter ball bearing concave roller
• •Stamped steel housing and roller
• •F-tab housing
• •Rear adjusting screw
• •A Phillips head screwdriver is required for installation
• •Please refer to the line art drawing and compare with your original item before purchasing