Cylinder Lock, 1-1/4 In., Schlage Shaped Keys Single Pack

This Schlage -shaped keyway and cylinder lock was designed to only aesthetically match actual Schlage keys and keyways, as it was designed specifically to be used in surface-mounted sliding patio door handle sets. This cylinder lock is constructed of brass, it comes finished with a chrome face and features a hardened cut-away tailpiece. Make sure to dry fit the lock before completing assembly to fit your door correctly. NOTE: if the key is binding the pressure from too tight of a fit is the reason (the tail piece needs to be trimmed). It works with vertical and 45 degree keyways (angle is determined when latch is extended to the locked position). *Tip: If keyed-alike cylinders are desired for more than one patio door handle set lock, kindly see Prime-Line model number E 2104. Note: The components of these cylinder locks are not compatible and cannot be rekeyed to match other Schlage locks, nor will Schlage keys fit into this cylinder lock.

• •5-Pin tumbler lock. Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.
• •Solid brass housing with a chrome face and Schlage shaped keys
• •Cylinder length 1-1/4 inch with hardened break away tail piece (may need to be trimmed to fit your lock)
• •Hardened break away tailpiece may need to be trimmed to fit your door
• •Please refer to the line art drawing for dimensions and compare with your needs before ordering