Plastic Bathtub Splash Guard, 9 Inch x 10-3/4 Inch, White, (Single Pack)

These white bath tub splash guards are constructed of rigid plastic and include a left and right corner piece. Each piece features a water-deflecting wing which curves in 2-3/8 in. towards the tub, designed to redirect flow of excess water back into the tub. These rigid, non-adjustable, corner-fitting splash guards come with a 90 degree angle, designed for tight-fitting corner installations. These splash guards are best installed with a clear or white silicone-based adhesive product, but wall and tub surfaces should be cleaned prior with alcohol to provide for a clean and permanent bond. Silicone adhesive is not provided with this item and must be purchased separately. Application of silicone adhesives should be followed as per manufacturer’s instructions. *Installation Tip: Once surfaces has been cleaned and splash guards have been set in place with silicone, allow 24 hours for curing prior to exposing to moisture.

Use these bathtub splash guards to help prevent water from creating dangerous slippery floors, or from damaging them

Each guard has a 9 in. wide reach and extends 10-3/4 in. vertically

Curved design will divert water back into Tub and Shower enclosure

Constructed of durable white plastic

Installs with silicone adhesive, tub caulk or mastic (not included)

Clean mounting area thoroughly before installation

White in color to match most tub finishes

For further dimensional information, please see the line drawing