Right-Handed, White, Casement Locking Handle with Offset Base Single Pack

This is a right-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has an a white finish with mounting holes for the handle assembly and the keeper at 1-1/2 inch on center.

• •Used by many contemporary window manufactures
• •This contemporary design is similar to a Truth hardware design
• •1-1/2 inch on center mounting holes
• •Diecast construction with a white finish
• •Matching left hand casement operator is Prime-Line part H 3820
• •Mounting hardware included
• •A Phillips head screwdriver is required for installation
• •Please refer to the line art drawing and compare with your original item before purchasing
• •Holes are drilled and countersunk for #10 flat head screws