Rollr Assy Stl 1-1/4"

This is a unique housing patio door roller assembly. It is 3/4 in. wide and 2-1/8 in. long with a 1-1/4 in. diameter steel ball bearing roller attached. To install, remove the screw from the back and insert the assembly into the bottom rail end. Replace side stile, insert screw and into assembly. As the screw draws the roller's backside tighter, the design causes the front end to rotate downward and the door to lift to the desired height. Used by Rolleze or Rylock.

• • 1-1/4 in. Steel Roller
• • Ball Bearing
• • Stamped Steel Housing with Roller
• • 3/4 in. wide, 1-1/8 in. tall and 2-1/8 in. long
• • Insert the roller into the bottom rail without the screw. Replace the side stile. As the screw draws the roller's bottom backside tighter, the design causes the far end to rotate downward causing the roller to lift the door to the desired height
• • Used on metal framed doors