3/4 in. Threaded Drip Irrigation Tee 1 pk

Attach 1/2 in. distribution tubing or dripline to a mainline pipe with the 1/2 in. X 1/2 in. X 3/4 in. FPT Compression Swivel Tee. The compression fitting has two 1/2 in. compression outlets and one 3/4 in. female pipe thread swivel inlet. Screw swivel hose thread onto a standard 3/4 in. MPT connection point; fit 1/2 in. supply tubing or dripline into the compression rings, where an internal barb compresses the tubing for a watertight fit. Filter washer inside screens out particles. The compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

• • Adds two branches of 1/2 in. distribution tubing or dripline from a 3/4 in. MPT connection point; Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system
• • 3/4 in. FPT swivel inlet connects to 3/4 in. MPT connection point on one end; 1/2 in. compression outlets connect to 1/2 in. tubing and dripline with outside diameter of 0.620 in. on opposite side
• • Thread the 3/4 in. FPT connection point onto the 3/4 in. MPT pipe on one end; on the other end, insert two sections of tubing of the compression fitting, where an internal barb will compress the tube to hold it in place
• • Built-in swivel makes it convenient to remove or attach adapter without twisting and potentially kinking the tubing
• • Compression fitting creates a watertight seal; internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting
• • Filter washer inside the adapter ensures a watertight fit and screens out particles before they can clog the system