Polyethylene Drip Irrigation Tubing 1/2 in. D X 50 ft. L

Use the 1/2 in. distribution tubing to transport water directly to your plants. Works as a supply line to an emitter or a feeder line branching off larger tubing or pipe. Another use is to punch emitters directly into the side of the tubing to deliver water along the way. The 1/2 in. tubing features an outside diameter (OD) of 0.620 in. & internal diameter (ID) of 0.520 in. While other manufacturers use blended recycled material to construct their entire tubing, Raindrip poly tubing has a unique layering method using 100% virgin content for the outer and inner layers for a more durable product, and middle layer of recycled content.

• • Use in a variety of ways: as a main supply line connected to a low-flow, drip-watering device; as a feeder line that branches off larger tubing or pipe; and with emitters punched into the tubing to deliver water along the line;
• • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
• • Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in.; connects to point-of-connection device using appropriate fitting; emitters and feeder lines can be punched directly into the line or attached to the end;
• • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
• • To use as a main supply line, attach to a point-of-connection device connected to the water source; to use as a feeder line, connect to the main line with a fitting; to use as a dripper line, attach emitters directly into the line
• • Works with Raindrip products and other products with compatible connection type