Raindrip Polyethylene Drip Irrigation Tubing 5/8 in. D X 50 ft. L

Build your drip system with durable tubing to transport water to your plants. 5/8 in. distribution tubing works as a main line to deliver water to an emitter or a feeder line; or punch emitters into side of tubing to distribute moisture along the line. The 5/8 in. supply tubing has an outside diameter (OD) of 0.700 in., internal diameter (ID) of 0.600 in. While other manufacturers use blended recycled material for their entire tubing, Raindrip poly tubing is constructed with an innovative layering method, using 100% virgin content for both inner and outer layers for a durability, and a middle layer of recycled content.

• • Use as a main supply line connected to a low-flow, drip-watering device, or punch emitters into the tubing to deliver water along the run;
• • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
• • Tubing outside diameter (OD) is 0.700 in., internal diameter (ID) is 0.600 in.; connects to point-of-connection device using appropriate fitting; emitters and feeder lines can be punched directly into the line or attached to the end;
• • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation; water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion
• • To use as a main supply line, attach to a point-of-connection device connected to the water source; to use as a dripper line, attach emitters directly into the line; Works with Raindrip products and other products with compatible connection type
• • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content;