Item
General Purpose Relay
Electrical Connection
Quick Connect
Contact Rating (AC)
15 A @ 250V
Contact Rating (DC)
15 A @ 28V
Status Indicator
LED and Mechanical Flag
Standards
CSA C22.2 No 14, CSA Certified, EAC, EN/IEC 61810-1, UL 508, UL Listed
Contact Material
Silver Alloy
Features
Plug In Protection Module to Protect Against Electrical Spikes
Power Consumption - Relay
1.6 VA
Green Environmental Attribute
RoHS 2011/65/EU Compliant
Maximum Operating Temperature
131 Degrees F
Resistance Properties
Shock-Resistant, Vibration-Resistant
Electrical Operating Durability
100,000
Maximum Switching Voltage
250V
Series
Harmony(TM) RPM Series
Minimum Switching Current
10 mA
Horsepower @ 120V AC
Not Rated
Horsepower @ 240V AC
Not Rated
Dielectric Strength
1,500V AC Between Contacts with Micro Disconnection, 2,000V AC Between Coil and Contact with Reinforced
Motor Rated
Not Rated - Not Rated
Push-To-Test Method
Lockable Push Test Button
Minimum Operating Temperature
-40 Degrees F
For Use With
Hard-Wired Logic Automated Systems
Mechanical Operating Durability
10,000,000
Coil Resistance
4,430 ohm
Switching Power
Max 3750 VA; 420 W; Min 170 mW 10 mA, 17 V
Operating Time
20 ms at nominal voltage
Switching Voltage
250 V IEC
Utilisation Coefficient
0.2
Ambient Air Temperature For Operation
-40 to 131°F (-40 to 55°C)
Control Type
Lockable test button
Device Presentation
Complete product
Drop-Out Voltage Threshold
Greater than or Equal to 0.15 Uc AC
Degree Of Protection
IP40 conforming to IEC 60529
Shock Resistance
15 gnin operation; 30 gnnot operating
Ambient Air Temperature For Storage
-40 to 185°F (-40 to 85°C)
Minimum Switching Capacity
170 mW 10 mA, 17 V
Resistive Load Current
15 A 250 V AC; 15 A 28 V DC
Rated Operational Voltage Limits
96 to 132 V AC
Product Certifications
EAC; CSA; UL
Maximum Switching Capacity
3750 VA; 420 W
Operating Rate
Less than or Equal to 1200 cycles/hour under load; Less than or Equal to 18000 cycles/hour no-load
Test Levels
Level A group mounting
Rated Impulse Withstand Voltage
4 kV 1.2/50 µs
Rated Insulation Voltage
250 V IEC; 300 V CSA; 300 V UL
Vibration Resistance
3 gn +/- 1 mm 10 to 150 Hz)5 cycles in operation; 5 gn +/- 1 mm 10 to 150 Hz)5 cycles not operating
Average Coil Consumption in VA
1.6 60 Hz
Control Circuit Voltage
120 V AC 50/60 Hz
Contact Type and Composition
1 C/O
Average Coil Resistance
4430 Ohm at 68°F (20°C) +/- 15%
Conventional Enclosed Thermal Current
15 A -40 to 131°F (-40 to 55°C)
Operating Position
Any position
