- Item
- Safety Controller
- Output Type
- 2 relays, 2 NO contacts (4 NO total) || solid state, 6, volt-free
- Enclosure Material
- Plastic
- IP Rating
- IP20
- Safety Output Configuration
- 4NO
- Safety Output Ratings
- 1.5 A @ 24V DC, 2 A @ 24V AC
- Number of Inputs
- 16
- Features
- Configurable, Monitoring Multiple Safety Functions
- Standards
- CSA, EN 1760-1/ISO 13856-1, EN 574/ISO 13851, EN 954-1/EN/ISO 13849-1, EN/IEC 60204-1, EN/IEC 60947-5-1, EN/IEC 61496-1, IEC 61508, TUV, UL Listed
- Input Power
- 24 V DC
- Mounting
- Surface or DIN rail
- Operating Temp.
- -10 to 55 Degrees C
- Response Time
- 30 msec
- Minimum Output Voltage
- 17 V relay output
- Minimum Output Current
- 10 mA relay output
- Synchronisation Time Between Inputs
- depending on configuration selected
- Parity
- even Modbus || no Modbus || odd Modbus
- [Uc] Control Circuit Voltage
- 28.8 V
- Power Consumption In W
- 12 W
- [Ith] Conventional Free Air Thermal Current
- 16 A relay output || 6.5 A static output circuit
- Maximum Line Resistance
- 100 Ohm <2000 m
- [Us] Rated Supply Voltage
- 24 V DC - 20 to 20 %
- Type Of Start
- configurable
- Number Of Addresses
- 1-247 Modbus
- Supported Modbus Function
- 01 8-bit output data/32-bit input data || 02 32-bit input data/8-bit output data || 03 information and errors
- [Uimp] Rated Impulse Withstand Voltage
- 4 kV III IEC 60647-5-1, DIN VDE 0110 part 1
- Safety Level
- can reach PL e/category 4 EN 954-1/EN/ISO 13849-1 || can reach SIL 3 IEC 61508
- Safety Module Name
- XPSMC
- Mounting Support
- mounting plate
- [Ui] Rated Insulation Voltage
- 300 V 2)IEC 60647-5-1, DIN VDE 0110 part 1
- Data Format
- 1 start bit/8 data bits || 1 stop bit even or odd || 2 stop bits without parity || RTU (Remote Terminal Unit) mode
- Output Thermal Current
- 4 A for both outputs simultaneously || 6 A for 1 output and 2 A for the other relay output
- Method Of Access
- slave
- Associated Fuse Rating
- 16 A gL power supply || 4 A gL relay output || 6 A fast blow relay output
- Communication Port Protocol
- Modbus 1 RJ45, serial link 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps
- Product Certifications
- TUV || UL || CSA
- Local Signalling
- 30 LEDs
- Input Protection Type
- external fuse 16 A
- Breaking Capacity
- 180 VA holding AC-15 C300 relay output || 1800 VA inrush AC-15 C300 relay output, 2 A 24 V static output circuit || 1.5 A 24 V DC-13)50 ms relay output
- Function Of Module
dynamic monitoring of hydraulic valves on linear presses || monitoring safety stop at top dead centre on eccentric press || muting function of light curtains || position selector || safety mat monitoring || safety time delays || shaft/chain breaking monitor || zero speed detection || light curtain monitoring category 4 EN/IEC 61496 || two-hand control category 3 EN 574/ISO 13851 || eccentric press || emergency stop monitoring, with or without time delay, 1 or 2-channel wiring || enabling switch monitoring, 2 or 3 contacts || foot switch monitoring || guard monitoring for injection presses and blowing machines || guard monitoring with 1 or 2 limit switches || hydraulic press || magnetic switch monitoring
- Product Or Component Type
- configurable safety controller
- Ambient Air Temperature For Operation
- -10-55 °C
- Ip Degree Of Protection
- IP20 conforming to EN/IEC 60529
- Ambient Air Temperature For Storage
- -25-85 °C
- Safety Use Category
- category 4 maximum EN 954-1/EN/ISO 13849-1 || PLE maximum EN/ISO 13849-1 || SIL 3 maximum IEC 61508
- Operating Temperature - Minimum
- 14 Degrees F
- Operating Temperature - Maximum
- 131 Degrees F
Create Account
