ZMAX Galvanized 16-Gauge 4x4 Adjustable Post Base

Simpson Strong Tie ABA44Z ZMAX Galvanized 16-Gauge 4x4 Adjustable Post Base 20-per BoxThe ABA is designed to attach wooden posts to existing concrete. The built-in 1in standoff of this adjustable post base helps to prevent rot at the end of the post. The ABA has a slotted anchor hole in the base for adjustability and attaches to the post with nails or Strong-Drive1/4 SD Connector screws. This versatile post base makes a cost-effective option for securing a post to the foundation.Key FeaturesThe slot in the base enables flexibility around the anchor bolt, making precise post placement easier1in stand-off design meets code requirements for structural posts installed in basements or exposed to weather or water splashIncreased uplift loads for earthquake or wind loadingMaterialSee tableFinishZMAX1/4; see Corrosion InformationInstallationUse all specified fasteners.See our AnchORg, Fastening and Restoration Systems for Concrete and Masonry catalog for retrofit anchor options, such as Titen HD1/4, Stainless-Steel Titen HD or SET-3G,.Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non-top-supported installations such as fences or unbraced carports.Place the base, cut washers and nuts on the anchor bolts. Make any necessary adjustments to post placement and tighten the nut securely on the anchor bolt.Place the post in the ABA and fasten using nails or Strong-Drive SD Connector screws