Blade Pro Epoxy Adhesive, Pint Kit

Blade Pro Epoxy Adhesive is a two part epoxy, high-performance glue designed specifically for the knife maker. This state-of-the art adhesive forms super-tough, flexible bonds to wood, Micarta, G10, and other composites. Tenacious bonds are developed to non-ferrous metals, as well as stainless, and carbon steel. Our solvent-free metal adhesive is low in viscosity and is easy to spread. This low viscosity epoxy resin is suitable for both full- and hidden-tang applications.

• •Premium Epoxy: Blade Pro epoxy adhesive is a 2-component, high-performance metal and wood glue designed specifically for the knife maker
• •Easy To Apply: Our epoxy glue is low in viscosity and is easy to spread; Thanks to its lower viscosity, it's suitable for both full- and hidden-tang applications; Mix at 1:1 ratio
• •Versatile Application: This state-of-the-art epoxy resin glue forms super-tough, flexible bonds to wood, Micarta, G10, and other composites; Tenacious bonds are developed to non-ferrous metals, as well as stainless and carbon steel
• •Curing: At 70°F, Blade Pro Epoxy Adhesive develops excellent properties within 12 hours; Machining can be done when once the knife epoxy has cured for 12-14 hours
• •Tips and Tricks: After clamping up the handle material, wipe off the excess glue with a paper towel wet out with acetone; Allow to set up for 2-3 hours and clean one more time using a q-tip wet out with acetone