Item
Power Inverter and Battery Charger
Peak Output Power
7,200 W
Continuous Output Power
3,600 W
Inverter Output Form
Modified Sine Wave
Inverter Input Voltage
36V DC; 120V AC
Inverter Output Voltage
120V AC
DC Connection
Bolt Down Terminals
Case Material
Polycarbonate
Max. Input Current
Full continuous load - 114 A at 36V DC; 54 A at 120V AC with full inverter and charger load
Nominal Output Power
3,600 W
Charger Output Voltage
120V
Charger Input Voltage
120V AC
Includes
Remote Control Module
Automatic/Manual
Automatic
Application
Powering Tools; Saws; Motors; Pumps; Portable Lighting; Appliances and Computer Equipment in Heavy-Load Conditions
Features
Automatic Transfer Switching, Automatic Voltage Regulation, Meets Normal and Peak Power Demands, Reliable Power for Mobile, Emergency and Remote Sites, Remote Control Capability, Rugged Polycarbonate Housing
Inveter Output Voltage
120V
Charger Input Current
20 A
Charger Output Current
30 A
Product Name
PowerVerter APS3636VR Power Inverter
Package Contents
PowerVerter APS3636VR Power Inverter, Instruction manual with warranty information, Wired Remote Switch with full LED status indicators
Output Voltage Regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
High Voltage Transfer to Battery Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 - see manual)
Brownout Correction
Brownouts starting at 103 are automatically boosted by 10%
Package Includes
APS3636VR 3600W PowerVerter APS 36V DC 120V AC Inverter/Charger;APSRM4 remote control module;Owner's manual
Voltage Regulation Description
Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels
Material of Construction
Polycarbonate
Overvoltage Correction
Over-voltages starting at 127 are automatically reduced by 10%
Overload Protection
Includes 25A input breaker dedicated to the charging system and 30A output breaker for AC output loads.
Voltage Compatibility (VDC)
36
Battery Pack Accessory (Optional)
98-121 sealed lead acid battery (optional)
Load Sensing
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.
Output Receptacles
Hardwire
Front Panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Nominal Input Voltage(s) Supported
120V AC
Voltage Compatibility (VAC)
120
Frequency Compatibility
60 Hz
Recommended Electrical Service
DC INPUT: Requires 36VDC input source capable of delivering 114A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation).
Transfer Time (Line Power to Battery Mode)
16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)
DC System Voltage (VDC)
36
Output Frequency Regulation
60 Hz (+/- 0.3 Hz)
Maximum Input Amps / Watts
DC INPUT: Full continuous load - 114A at 36VDC. AC INPUT: 54 amps at 120VAC with full inverter and charger load (20A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output load
Nominal Output Voltage(s) Supported
120V
Form Factors Supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional External switch for wired remote control of APS unit ( APSRM4 ) accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
Low Voltage Transfer to Battery Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95V - see manual)
Relative Humidity
0%-95% Non-Condensing
