Includes 4U battery pack, 4U UPS/power module and detachable bypass PDU; MAXIMUM DEVICE DEPTH specification refers to the whole UPS installed depth with bypass PDU installed
Maximum Device Depth (in.)
34
Primary UPS Height (mm)
178
Primary UPS Width (mm)
445
Minimum Required Rack Depth (inches)
40
Primary UPS Depth (mm)
706
Unit Dimension Details
Includes 4U battery pack, 4U UPS/power module and detachable bypass PDU; MAXIMUM DEVICE DEPTH specification refers to the whole UPS installed depth with bypass PDU installed
Overall Depth
27.8 in
Details
Item
UPS System
UPS Type
Online Double Conversion
Power Rating
16kVA
Mounting
Rack
Wattage
11.2 kW
Input Voltage
120 V, 208 V, 240 V
Output Voltage
120 V, 208 V, 240 V
Backup Time (Half/Full Load)
12 min/5 min
Outlet Type
Hardwired
Medical Grade
Not Medical Grade Approved
Number of Outlets
4
Output Voltage - UPS Systems
112V AC, 208V AC, 240V AC
Display Type
LCD
Ports
DB9 Serial, EPO, USB
VA Rating - UPS Systems
16.0 kVA
Input Current
68 A
Standards
UL
Hz
60 Hz
NEMA Receptacle Configuration
No Configuration
Watts - UPS Systems
11.2 kW
Outlet Type - UPS Systems
Hardwired
Mounting - UPS Systems
Rack
Phase
Single
Transfer Time
0 msec
Includes
(4) Post Rack Mount Installation Brackets, BP192V18-4U External Battery Pack, SUPDMB16KHW Detachable PDU with Manual Bypass Switch
Input Voltage - UPS Systems
112V AC, 208V AC, 240V AC
Special Features
Hot-Swappable Batteries
Automatic Volts Regulation
Yes
Fax/Modem Line Protection
No
Watts
11.2kW
Input Connection
Hardwired
Housing Material
Steel
Battery Type
Valve Regulated Lead Acid (VRLA)
UPS Housing Material
Steel
Front Panel LCD Display
Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats
UPS Input Connection Type
Hardwire
Expandable Runtime
Yes
Output Capacity Details
16,000VA, 11,200W (240V) / 13,860VA, 11,200W (208V); Supports up to 105% load continuously in double conversion mode, 106 to 125% for 3 minutes, 126 to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support equipment directly from mains power; Double conversion mode is automatically restored as the overload is cleared
2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and execute scrolling LCD functions; bundled PDU includes bypass switch to enable hot-swap UPS power module replacement
Cold Start (Startup in Battery Mode During a Power Failure)
Cold-start operation supported
Output kVA Capacity (kVA)
16
AC Economy Mode BTU / Hr. (Full Load)
2438
UPS Certifications
Meets FCC Part 15 Category A (EMI); Tested to CSA (Canada); Tested to NOM (Mexico); Tested to UL1778 (USA)
Output Receptacle Details
Supports North American 208/120V or 240/120V split-phase output (L1, L2, N, G)
Power Factor
0.7
PowerAlert Software
For local monitoring via the UPS™s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert
EMI / RFI AC Noise Suppression
Yes
Output Voltage Regulation (Line Mode)
+/- 3%
Battery Recharge Rate (Included Batteries)
Less than 6 hours from 10% to 80% (typical, full load discharge)
Undervoltage Correction
Corrects undervoltages to 65V (measured L1-N : L2-N)
DC System Voltage (VDC)
192
High Availability UPS Features
Automatic inverter bypass; Hot swappable batteries; Hot swappable UPS power module; Manual bypass switch
Network Monitoring Port Description
RS232 and contact closure communications are supported on one DB9 port
Full Load Runtime (min.)
5 min. (11,200w)
Audible Alarm
Unique audible alarms for all major UPS, environmental and power conditions (see manual)
LED Indicators
6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options
Nominal Voltage Details
240/120V or 208/120V split phase output
Operating Elevation (ft.)
0-3000m (0 to 10,000 ft.)
Voltage Regulation Description
+/-3% output voltage regulation in online, double-conversion mode
Output kW Capacity (kW)
11.2
Output Watt Capacity (Watts)
11200
Crest Factor
0.125694444444444
Input Phase
Single-Phase
Battery Mode BTU / Hr. (Full Load)
4248
Communications Cable
USB and DB9 cabling included
Overvoltage Correction
Corrects overvoltages to 140 (measured L1-N : L2-N)
Ideal for protection of sensitive electronics in any application calling for upright tower or 19-in. rackmount UPS protection, Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems, Output volt amp capacity (VA): 16,000 (240V)/13860 (208V)
Form Factor
Rack/Tower
Serial Port
Yes
Backup/Run Time (Half Load)
12 Minute
Receptacle Type
Hardwired
Product Type
Double Conversion Online UPS
Runtime Half Load (min.)
12 min. (5600w)
Package Includes
SU16000RT4UPM UPS Power Module;BP192V18-4U External battery pack;SUPDMB16KHW Detachable PDU with manual bypass switch;4-post rackmount installation brackets
Output Capacity (Watts)
11200
UPS Applications
Mission Critical Applications
Battery Mode Heat Dissipation (BTU/Hr) @ Full Load
4248
Runtime Full Load (min.)
5 min. (11,200w)
Output Capacity (VA)
16000
Manufacturer Warranty
2 yr
Surge Suppression Rating
3,620 J
Run Time - Half Load
12 min
Operating Temperature - Minimum
32 Degrees F
External Battery Compatible
External Battery Pack Compatible
Plug Configuration
Hardwired
External Battery Pack Part Number
BP192V18-4U
Output Ports Included
DB9 Serial, EPO, USB
Number of Outlets - Surge Only
4
Input Current - Maximum
68 A
Frequency
60 Hz
Automatic Voltage Regulation
Includes Automatic Voltage Regulation
Includes Battery
Battery Included
Transfer Time - Maximum
0 msec
Operating Temperature - Maximum
104 Degrees F
Run Time - Full Load
5 min
Power Rating - Apparent
16 kVA
Receptacle Configuration
Hardwired
Battery Chemistry
Valve Regulated Lead Acid
Number of Outlets - UPS
4
Battery Recharge Time
6 hr
Power Rating - Real
11.2 kW
Description
UPS System, Online Double Conversion, Power Rating 16 kVA, Wattage 11.2 kW, Input Voltage 112V AC, 208V AC, 240V AC, Output Voltage 112V AC, 208V AC, 240V AC, Backup Time (Half/Full Load) 12 min/5 min, Mounting Rack, Outlet Type Hardwired, Number of Outlets 4, Medical Grade Not Medical Grade Approved, NEMA Receptacle Configuration No Configuration, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 0 msec, Width 18 in, Depth 34 in, Height 7 in, Cord Length No Cord
