Viking Electronics VK-K-1900-7 Viking Hot-Line Vandal Resista

The K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.
The K-1900-7 housing consists of a heavy gauge stainless steel panel an armored cable a heavy duty handset and an all metal cradle. The K-1900-7 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

Catalog sales.

Kiosks.

Courtesy and customer service phones.

Automated tellers (ATM’s).

Hot-line reservation phones.

Security and emergency phones.

Replaces leased ringdown circuits.

Gate/entrance communication in noisy locations (diesel trucks factory noise etc.).

Auto dials 1 (up to 32 digits) programmable speed dial number.

Touch Tone or pulse dialing.

Non-volatile memory (no batteries required).

Operates on analog PABX and key system extensions or analog Centrex and C.O. lines.

Programmable 6 digit security code.

Touch Tone programmable.

Vandal resistant features: 1/8” thick stainless steel panel armored cable and metal cradle.

Programmable pre-dial pause.

Blocks fraudulent calls from hand held pocket dialers.

Hearing aid compatible amplified handset with sealed push button volume control.

Optional Enhanced Weather Protection (EWP).

Power: Telephone line powered (20V DC/18mA minimum).

Dimensions Overall: 5” x 10” x 4”.

Operating Temperature: 0°C to 32°C (32°F to 90°F).

Humidity: Standard - 5% to 95% non-condensing EWP - Up to 100% condensing.

Panel Material: 125 inch thick stainless steel.

Handset Cable Length: Standard K-1900-7 - 86cm (34”) K-1900-7-EWP - 137cm (54”).

Mounting: Flush mount or surface mount with optional VE-5x10.

Dial Speed: Touch Tone - Normal = 120ms on/off Fast = 50ms on/off; Pulse - Normal = 10 pps Fast = 20 pps.

Connections: (2) gel-filled butt connectors.