Black HDPE Sheet Stock 24" L x 12" W x 1.000" Thick

The ZORO SELECT - 1ZAW6 is a Sheet Stock plastic sheet, utilized for its adaptability and robustness in a variety of industrial applications. Made from HDPE material, this black-colored sheet stock can be cut, shaped or molded into different forms to meet specific project requirements. Its standard grade indicates unique properties such as strength and resistance levels that make it suitable for particular uses.

• Corrosion and Chemical Resistance: The sheet is designed to withstand exposure to certain corrosive substances, chemicals, or harsh environmental conditions.
• Friction Coefficient & Rating: With a friction coefficient of 0.2 and a very slippery rating, this product exhibits lower frictional resistance under specific conditions.
• Impact Strength & Rating: It has an impact strength of 1.30 ft-lb/in but with poor rating suggesting it may not withstand sudden force or shock without potential breakage.
• Machinability: This attribute refers to how readily the plastic sheet might be cut, shaped or finished using appropriate tools while minimizing potential harm to both material and equipment.
• Temperature Range: The specified operating temperature range is between -58 Degrees F to 176 Degrees F; performance outside these parameters is not guaranteed.
• Tensile Strength & Rating: With tensile strength rated at up-to-4,600 psi but poor rating suggesting possible limitations on resilience under pulling stress before potential breakage