Black UHMW Polyethylene UHMW Polyethylene Plastic Sheets & Bars 96" L x 48" W x 1/2" Thick

The ZORO SELECT - PS-UHMW-RCY-20 is a UHMW Polyethylene Plastic Sheet & Bar, crafted from ultra-high molecular weight polyethylene. This raw material product has been observed to have a degree of durability and resistance to wear. It can be cut, shaped, or machined into various components by industry professionals in manufacturing, engineering, or construction fields.

• Corrosion and Chemical Resistance: The plastic sheet is designed with the intent of resisting damage or degradation from exposure to certain corrosive substances and chemicals.
• Friction Coefficient: With a measured friction coefficient of 0.14, this product is intended for applications where low frictional resistance may be beneficial.
• Impact Strength: The plastic sheet has demonstrated some level of impact strength during testing but results can vary depending on the force applied.
• Machinability: This product's properties suggest potential for machining; however, outcomes will depend on specific tooling conditions and techniques used.
• Temperature Range: This product has been tested under conditions ranging from -22 Degrees F up to 180 Degrees F; performance may vary outside these parameters.
• Tensile Strength: With a measured tensile strength value up-to approximately 4,300 psi (pounds per square inch), the material shows certain levels of resilience in test conditions simulating stretching forces