Clear PETG Sheet Stock 24" L x 24" W x 0.125" Thick

The ZORO SELECT - 1UTP8 is a Sheet Stock plastic sheet, made from PETG material. This clear and transparent plastic sheet comes in a standard grade with dimensions of 24" width and length. It is a versatile material that can be used in various industrial applications where fabrication of parts or prototypes may be needed.

• Corrosion and Chemical Resistance: The sheet has properties that may provide some resistance to corrosive substances, chemicals, and certain environmental conditions.
• Friction Rating: This plastic sheet has a slippery friction rating which could affect its use in applications requiring movement control and stability.
• Impact Strength: Its impact strength is measured at 1.7 ft-lb/in; however it is rated lower on the scale for withstanding high forces or shocks over short periods without breaking.
• Machinability: Its machinability rating suggests potential ease when cutting, shaping, or finishing using appropriate industrial tools; though care should always be taken not to cause damage to either the material itself nor the equipment being used.
• Temperature Range: The specified operating temperature range lies between -40 Degrees F and 153 Degrees F. The product's performance characteristics might vary outside these limits.
• Tensile Strength: The tensile strength is rated at 7,700 psi (pounds per square inch), indicating the potential stress this material might withstand before breaking when subjected to stretching or pulling forces.