Off-White HDPE Sheet Stock 24" L x 12" W x 0.500" Thick

The ZORO SELECT - 1ZAJ4 is a Sheet Stock plastic sheet, known for its versatility and durability in various industrial applications. Made from HDPE material, this off-white plastic sheet can be cut, shaped or molded into different forms to meet specific project requirements. With standard grade classification, it exhibits good resistance against corrosion and chemicals.

• Dimensions: The nominal size of the sheet is 12 inches in width and 24 inches in length with tolerances of +/-0.250 inch for both dimensions.
• Temperature Range: It is rated for operation within a temperature range of -58 Degrees to 176 Degrees F. Performance may vary based on environmental conditions.
• Machinability: Rated as fair for machinability with industrial tools. Care should be taken during machining process to avoid potential damage.
• Friction Coefficient & Rating: Has a friction coefficient value of 0.2, indicating potential slipperiness under certain conditions.
• Tensile Strength & Impact Strength: Tested for tensile strength up to 4600 psi and impact strength at only 1.30 ft-lb/in; actual performance may vary depending on usage conditions.
• Water Absorption & Wear Factor: Water absorption tested at approximately 0.01% by weight when immersed in water; wear factor tests indicate some resistance against deterioration due to friction, though actual results may vary based on use."