Off-White HDPE Sheet Stock 24" L x 24" W x 1.000" Thick

The ZORO SELECT - 1ZAN3 is a Sheet Stock, a type of plastic sheet that comes in various sizes and thicknesses. This off-white HDPE (High-Density Polyethylene) material provides versatility and durability, which may be useful in fabricating parts or prototypes. It can be cut, shaped, or molded into different forms depending on the specific requirements of the project.

• Corrosion and Chemical Resistance: The sheet is noted for its resistance to corrosion and chemicals. It's designed to resist certain levels of damage from specific substances or environmental conditions.
• Friction Coefficient & Rating: With a friction coefficient of 0.2 and rated as 'very slippery', this sheet stock is expected to offer low resistance when sliding against other surfaces.
• Machinability: Rated as 'fair' for machinability, suggesting that the sheet could potentially be worked with using industrial tools without significant risk of damaging the material or equipment.
• Temperature Range: The specified operating temperature range for this plastic sheet is between -58 Degrees F to 176 Degrees F; it's intended design allows it maintain its form within these ranges.
• Tensile Strength & Impact Strength: Given its tensile strength (4,600 psi) and impact strength ratings (1.30 ft-lb/in), consideration should be given towards applications where high force isn't frequently applied over short durations.