Off-White HDPE Sheet Stock 48" L x 24" W x 0.750" Thick

The ZORO SELECT - 1ZAR5 is a Sheet Stock, a type of plastic sheet that comes in various sizes and thicknesses. Made from HDPE material, this off-white plastic sheet is designed for industrial applications where fabricating parts or prototypes are required. It can be cut, shaped, or molded into different forms depending on the specific requirements of the project.

• Corrosion and Chemical Resistance: The sheet is designed with a focus on resisting corrosion and chemicals, which may make it an option for use in challenging environments.
• Friction Coefficient & Rating: With a friction coefficient of 0.2 and a very slippery rating, this sheet has low resistance when sliding against another object.
• Impact Strength & Rating: Despite its poor impact strength rating at 1.30 ft-lb/in., it's still acceptable for certain industrial applications.
• Machinability: This product exhibits certain level of machinability, suggesting that it could potentially be cut or shaped using industrial tools; however, care should be taken not to cause damage to the material or equipment.
• Temperature Range: The specified operating temperature range is between -58 Degrees F and 176 Degrees F; performance outside this range has not been evaluated.
• Tensile Strength & Rating: Rated with a tensile strength at 4,600 psi; please consider this rating when determining suitability for your specific application needs.
• Water Absorption & Rating: With a water absorption rating of only 0.01%, users should evaluate if this meets their requirements in situations where moisture exposure might occur