White HDPE HDPE Sheet 36" L x 48" W x 1/4" Thick

The ZORO SELECT - BULK-PS-PE-461 is a type of Sheet Stock, which is a versatile and durable plastic sheet used by industry professionals for fabricating parts or prototypes. This white HDPE (High-Density Polyethylene) sheet comes in standard grade with dimensions of 36" width x 48" length and thickness of 1/4". It can be cut, shaped, or molded into different forms depending on the specific requirements of the project.

• Backing Type: The plain backing type allows it to be attached to other surfaces or materials in various industrial applications.
• Corrosion and Chemical Resistance: This sheet stock has been tested to resist certain levels of corrosive substances and harsh environmental conditions.
• Friction Coefficient & Rating: A friction coefficient value of 0.2 indicates low resistance when sliding against another object. Its very slippery rating impacts its suitability for applications where movement control is essential.
• Impact Strength & Rating: It is rated for an impact strength level at 3.0 ft.-lbs./in..
• Machinability: This plastic sheet is designed for use with industrial tools, but care should be taken to avoid potential damage.
• Temperature Range: The specified operating temperature range is between -70 Degrees F and 180 Degrees F. Performance outside this range may vary.
• Water Absorption & Rating: This sheet stock has a low water absorption rate of 0.0001 as per testing standards; suitability for moisture-exposed applications depends on specific usage conditions.