Solenoid Valve, 2-Way, 2-Position, Normally Closed, 1 in Pipe Size, 120V AC, High Flow, Brass, NBR

The ASCO HT8210G004 Solenoid Valve is a 2-way, 2-position pilot-operated valve with a normally closed starting configuration. Constructed with a brass body and NBR seals, it is designed for controlling the flow of air, inert gases, light oil, and water. The valve has a nominal pipe size of 1 inch with NPTF inlet and outlet connections and operates with a 1-inch orifice diameter. It includes the coil and seal components for installation. This valve is equipped with an IP66-rated coil enclosure with a junction box and 1/2 inch conduit hub electrical connections. Ambient operating temperature range: 14°F to 140°F; fluid temperature range: up to 180°F; IP66-rated enclosure; suitable for indoor/outdoor use.

Key Features:

• Valve Design: 2-Way/2-Position
• Operation Type: Pilot Operated
• Valve Starting Configuration: Normally Closed
• Body Material: Brass
• Seal Material: NBR
• Nominal Pipe Size: 1 in
• Orifice Diameter: 1 in
• Inlet/Outlet Connections: NPTF thread type
• Electrical Voltage: 120V AC
• Wattage: 6.1 W
• Coil Enclosure: IP66-rated coil enclosure with junction box and 1/2 inch conduit hub
• Electrical Connection: 1/2 in Conduit Hub
• Ambient Temperature Range: 14°F to 140°F
• Maximum Fluid Temperature: 180°F
• Operating Pressure Differential (Maximum): 150 psi for air/inert gas and water; 100 psi for light oil
• Operating Pressure Differential (Minimum): 5 psi for air/inert gas, light oil, and water
• Environmental Rating: Indoor and Outdoor use
• IP66 rating
• Response Time: 1 second
• Valve Type: High Flow
• Mounting Orientation: Vertical
• Includes Coil: Yes
• Includes Seal: Yes
• Standards: UL Listed
• Dimensions (H x L x W): 5-5/8 in x 3-3/4 in x 3-11/32 in