Solenoid Valve, 2-Way, 2-Position, Normally Closed, 1 in Pipe Size, 12V DC, High Flow, Brass, NBR

The ASCO 8210G004LF 12/DC is a pilot-operated, 2-way/2-position solenoid valve with a normally closed configuration, designed to control the flow of air, inert gases, light oil, and water. Constructed with a brass valve body and equipped with a coil enclosure IP65-rated, this valve operates on 12 V DC and includes the coil and seals. The valve features a vertical mounting orientation; orifice diameter: 1 inch.

Key Features:

• Valve Type: High Flow, Pilot Operated
• Valve Design: 2-Way/2-Position; Valve Positions: 2-Position; Normally Closed
• Body Material: Brass; Seal Material: NBR (Buna-N)
• Voltage: 12 V DC; Wattage: 6.1 W
• Flow Coefficient (Cv): 13
• Inlet and Outlet Connection Type: NPTF; Thread Type: NPT; Nominal Pipe Size: 1 in; Center Line Pipe Size: 4-1/64 in
• Maximum Operating Pressure Differential: 150 psi Air/Inert Gas and Water, 100 psi Light Oil; Minimum Pressure Differential: 5 psi Air/Inert Gas, Light Oil, Water
• Maximum Fluid Temperature: 180°F; Ambient Temperature Range: 14°F to 140°F
• Coil Insulation Class: F; Response Time: 1 sec
• Electrical Connections: 1/2 in Conduit Hub
• Environmental Rating: Indoor, Outdoor; IP Rating: 65; NEMA Enclosure Ratings: 1, 2, 3, 3S, 4, 4X
• Includes coil and seals
• Standards: CSA, UL