Solenoid Valve, 2-Way, 2-Position, Normally Closed, 1/4 in Pipe Size, 24V DC, High Flow, Brass, NBR

The ASCO 8262H020LF 24/DC is a direct-acting, normally closed solenoid valve designed to control the flow of liquids or gases through two distinct flow paths. Constructed with a brass valve body and equipped with an NBR seal, it includes the coil necessary for operation. Media compatibility: air; aggressive gases and liquids; ammonia; biodiesel fuel; fuel oil; hot water; inert gases; light oil; liquid propane gas; natural gas; oxygen; steam; water. It can be installed in either horizontal or vertical orientations and is rated for operation within an ambient temperature range of -13 to 131°F, withstanding fluid temperatures up to 180°F. Enclosure ratings: NEMA 4X, IP65; intended for indoor and outdoor use in corrosive environments.

Key Features:

• Valve Type: High Flow, 2-Way/2-Position design with a 2-Position actuator
• Operating Voltage: 24V DC with a coil wattage of 10.6 W
• Valve Orifice: 3/32 in diameter providing a Cv flow coefficient of 0.21
• Connection Types: NPTF inlet and outlet threads with 1/4 in nominal pipe size
• Operating Pressure Differential Max: 235 psi for Air/Inert Gas, 160 psi for Light Oil and Water; Minimum differential is 0 psi for these media
• Coil Enclosure and Insulation: H-type coil enclosure with Class H insulation
• Electrical Connections: 16-inch leads for power supply connection
• Construction: Brass body with NBR seals
• Response Time: Approximately 1 second for valve actuation
• Dimensions: Overall length 1-5/16 in, width 1-11/16 in, and height 2-31/32 in
• Certifications: CSA and UL listed