Solenoid Valve, 4-Way, 2-Position, Universal, 3/8 in Pipe Size, 120V AC, NAMUR Mount, Direct Acting

The ASCO EF8344G072 is a 4-way, 2-position direct acting solenoid valve designed for controlling the flow of air, inert gas, light oil, and water. Constructed with a brass body and NBR seals, it includes the coil required for operation and supports installation in either horizontal or vertical orientations. The solenoid coil features Class F insulation and Explosion-proof, watertight enclosure with Class F insulation; Environmental rating: Hazardous, Indoor, Outdoor. The valve includes NPTF inlet and outlet connections with a nominal pipe size of 3/8 inch and a center line pipe center size of 3 inches. This model operates on 120V AC at 60 Hz with a power consumption of 10.1 watts.

Key Features:

• Valve Type: NAMUR Mount, 4-Way/2-Position, 2-Position operation
• Operation Method: Direct Acting
• Body Material: Brass
• Seal Material: NBR (Buna-N)
• Orifice Diameter: 3/8 in
• Flow Coefficient (Cv): 1.4
• Maximum Fluid Temperature: 180°F
• Operating Pressure Differential Range: 10 psi minimum to 150 psi maximum for air/inert gas; 10 psi minimum to 125 psi maximum for light oil and water
• Coil Enclosure: Explosion-proof, watertight enclosure with Class F insulation
• Electrical Connections: 1/2 in conduit with 18 in leads
• Voltage: 120V AC @ 60 Hz
• Dimensions: Overall Height 4 in, Length 6 in, Width 3-3/16 in
• Environmental rating: Hazardous, Indoor, Outdoor
• Mounting Orientation: Horizontal or Vertical
• Includes Coil and Seal
• Thread Type: NPT for both inlet and outlet
• Standards: ATEX, CSA, FM, IEC, SIL, UL Listed