5,500+ Results for DWYER INSTRUMENTS - Page 19
Mfr # 2-5000-100MM
Key Features:
- Item: 2-5000 0-100Mm Range Minihelic Gauge
Mfr # A3001
Key Features:
- Differential Pressure Gauge Type: Differential Pressure Gauge
- Gauge Nominal Dial Size: 3 3/4 in
- Basic Gauge Case Material: Metal
Mfr # VFA-1-SSV
Key Features:
- Length: 4.3 in
- Height: 1.2 in
- Width: 2.2 in
Mfr # RMA-23
Key Features:
- Item: Flowmeter
- Accuracy: 4%
- Overall Length: 2.6 in
Mfr # 673-3
Key Features:
- Item: Pressure Transmitter
- Range: 0 to 5 psi
- Output: 4 to 20mA DC
Mfr # A-104
Key Features:
- Item: 1 Qt Bottle Red Gauge Oil
Mfr # BPS-005
Key Features:
- Item: Power Supply
- Output: 24 VDC (full wave rectified and regulated) adjustable 1.5 to 29 VDC, 0.5 A max.
- Features: Snap track design allowing for easy panel installation; Regulated 0.5 Amp
Mfr # STC341
Key Features:
- Item: Clip Pipe Mount Dial Thermometer
- Sensing Element: Bimetal
- Dial Size: 2 in
Mfr # BPS-015
Key Features:
- Item: Power Supply
- Output: 24 VDC (full wave rectified and regulated) adjustable 1.5 to 27 VDC.
- Features: Snap track design allowing for easy panel installation; Regulated 1.5 Amp
Mfr # BDPA-04-2-N
Key Features:
- Wetted Materials: Diaphragm: Silicone; Housing: Switch Body: PA 6.6 and POM; Cover: Polystyrene.
- Features: Adjustment knob changes switching pressure easily with a pressure gage reducing components for application; Low cost device makes it an excellent solution in BAS and HVAC applications requiring duct control and monitoring; Relay contact allows simple integration with DDC or building systems
- Electrical Connections: Screw terminals. M20x1.5 with cable strain relief or optional 1/2" NPT connection.
Mfr # PAFS-1006
Key Features:
- Item: Averaging Flow Sensor
- Connection Size: 1/4 in, 3/8 in
- Connection Type: Push-On
Mfr # DA-31-2-4
Key Features:
- Process Connection: General purpose and weatherproof: 1/4" male NPT; 1/2" male NPT on range 15S and 16S. Explosion-proof: 1/2" male NPT and 1/4" female NPT.
- Electrical Connections: Screw terminal.
- Features: Visible calibrated dial provides an easy and fast check without having to open device causing dangerous conditions to operators; On/off indication (except hermetically sealed snap switch models) gives operator clear indication of state of switched equipment that could be located in another location; Adjustable or fixed deadband supports control applications by reducing equipment wear-out by unnecessary recycling; External switch setpoint adjustments reduces set-up time; Pressure ranges of full vacuum to 8000 psig gives application designers the ability to specify standard equipment, simplifying install and training, and reducing servicing costs; UL listed, CSA approved many models FM approved to support rigorous process applications and regulations; General purpose, weatherproof or explosion-proof enclosures for a variety of indoor or outdoor environments meeting the needs of multiple applications and uses
Mfr # 651A-10
Key Features:
- Item: Temperature Transducer
- Temp. Range: 32 to 212 Degrees F
- Sensor Type: RTD
Mfr # DPGA-09
Key Features:
- Item: Digital Industrial Pressure Gauge
- Includes: 9 V Alkaline Battery
- Range: 0 to 200 psi
Mfr # DTFA-1A-10A
Key Features:
- Length: 4.7 in
- Height: 3.2 in
- Width: 3.1 in
Mfr # 651A-20
Key Features:
- Item: Temperature Transducer
- Sensor Type: RTD
- Temp. Range: 32 to 392 Degrees F
Mfr # WM2-A-C-07
Key Features:
- Height: 7.7 in
- Length: 12 in
- Width: 5.7 in
Mfr # ADPS-07-2-N
Key Features:
- Item: Air Pressure Switch
- Type: Differential
- Sample Line Connector: 1/4 in Slip On Fitting
Mfr # APT-100-5SB
Key Features:
- Item: AC Power Transformer
- Mounting - Transformer: Foot; Universal (1/2 in Hub Plate)
- Electrical Connections: Models ending in -20: 20" (508 mm) 18 AWG leads; All other models: 8.5" (210 mm) 18 AWG leads.
Mfr # RHP-3O11
Key Features:
- Item: Humidity Transmitters
- Temp. Range: -20 to 140 Degrees F
- Sensor Type: RTD or Thermistor
Mfr # A-307
Key Features:
- Item: Static Pressure Fitting
- Connection: For 1/4 in Metal Tubing Connection
- For Use With: Controllers, Manometers, Pressure Switches