BX60 Cogged V-Belt, 63 in Outside Length, 21/32 in Top Width, 13/32 in Thick, 1 Rib, 6A130

The DAYTON - 6A130 is a Cogged, Classical V-Belt designed for general industrial applications. This belt is constructed with Gum Rubber, a fabric cover, and polyester cords which are known for their properties of resisting certain environmental factors like heat and chemicals. The raw edge, cogged construction is intended to enhance grip and power transmission efficiency.

Key Features of the DAYTON - 6A130 V-Belt:

• Belt Material: Made from Gum Rubber with a Fabric Cover and Polyester Cords for enhanced durability.
• Construction: Raw Edge, the cogged design is intended to enhance grip and power transmission efficiency.
• Minimum Pulley Pitch Diameter: Suitable for use with pulleys having a minimum pitch diameter of 4 inches.
• Number of Ribs: Contains one rib that aids in distributing load evenly across the belt's width.
• Outside Length: Has an outside length of 63 inches. Compatibility with specific machinery drive systems depends on individual system requirements.
• Resistance Properties: Has been tested for resistance against Heat; Oil under controlled conditions. Suitability for harsh working conditions should be determined based on individual application needs. Also has Static Conductive properties
• Tensile Strength: Rated at a tensile strength of 5,900 N/mm under standard testing conditions. Actual performance may vary depending on use circumstances.
< V-Belt Section & Type: Classified under the BX section indicating specific dimensions compatible with certain types of machinery. Categorized as a Classical; Cogged type v-belt according to industry standards.