- MFR #
- 4JMW8
- Zoro #
- G3442512
- UPC #
- 190735326725
- Country of Origin
- China
- HP
- 1/2 hp
- Item
- Centrifugal Pump
- Housing Material
- 304 Stainless Steel
- Phase
- Three
- Voltage
- 208-230/460
- Max. GPM @ Head
- 38 gpm @ 5 ft
- Max. Head
- 50 ft
- Best Efficiency GPM @ Head
- 28 gpm @ 22 ft
- Inlet
- 3/4 in NPT
- Outlet
- 3/4 in NPT
- Motor Enclosure
- Totally Enclosed Fan Cooled
- Impeller Type
- Closed
- GPM of Water @ 30 Ft. of Head
- 20
- NEMA/IEC Frame
- 56J
- GPM of Water @ 10 Ft. of Head
- 34
- Hz
- 60
- GPM of Water @ 20 Ft. of Head
- 29
- GPM of Water @ 5 Ft. of Head
- 38
- Impeller Material
- 304 Stainless Steel
- Max. Specific Gravity
- 1.0
- Seal Material
- Carbon, Ceramic, Stainless Steel, Viton
- Amps
- 3.0-2.8/1.4
- Best Efficiency Range GPM @ Head
- 24 to 33 gpm @ 28 to 12 ft
- Max. Case Pressure
- 150 psi
- Drain Plug
- No
- Inlet Pressure
- 128 psi
- Wetted Materials
- 304 Stainless Steel, Carbon, Ceramic, Viton
- Duty
- Continuous
- GPM of Water @ 25 Ft. of Head
- 26
- GPM of Water @ 40 Ft. of Head
- 5
- Bearing Type
- Ball
- Min. GPM @ Head
- 5 gpm @ 40 ft
- Port Rotation
- 90 Degrees Increments
- Screw Material
- Stainless Steel
- Agency Compliance
- CUS
- Includes
- Manual
- Application
- Chemical Processing, Circulation, Cooling, Liquids Transfer, Pressure Boosting and Circulating
- Service Factor
- 1.15
- Max. Liquid Temp.
- 200 Degrees F
- Motor RPM
- 3,450 RPM
- Max. Fluid Viscosity
- 31 SUS
- GPM of Water @ 15 Ft. of Head
- 32
- Shaft Material
- Stainless Steel
- Seal Type
- Mechanical
- Motor Type
- Three-Phase Induction
- Volute Material
- 304 Stainless Steel
- Standards
- CUS
- Flow Rate @ 15 ft of Head (Maximum)
- 32 gpm
- Media Temperature (Maximum)
- 200 Degrees F
- Intake Pipe Type
- NPT
- Case Pressure (Maximum)
- 150 psi
- Nameplate Voltage
- 208-230/460V AC
- Motor Speed (Maximum)
- 3,450 RPM
- Wetted Material
- 304 Stainless Steel, Carbon, Ceramic, Viton
- Viscosity (Maximum)
- 31 SUS
- Specific Gravity (Maximum)
- 1
- Flow Rate @ 20 ft of Head (Maximum)
- 29 gpm
- Flow Rate @ 25 ft of Head (Maximum)
- 26 gpm
- Best Efficiency Head
- 22 ft
- Feet of Head (Maximum)
- 50 ft
- Impeller Design
- Closed
- Best Efficiency Flow
- 28 gpm
- Ambient Temperature (Maximum)
- 104 Degrees F
- Flow Rate @ 30 ft of Head (Maximum)
- 20 gpm
- Ambient Temperature (Minimum)
- 40 Degrees F
- Flow Rate (Maximum)
- 38 gpm
- Flow Rate @ 10 ft of Head (Maximum)
- 34 gpm
- Shut Off Pressure (Maximum)
- 150 psi
- Compatible Motor Frame
- 56J NEMA
- Current
- 3.0 to 2.8 or 1.4 A
- Horsepower (Maximum)
- 1/2 hp
- Discharge Rotation
- 90 Degrees Increments
- Discharge Pipe Type
- NPT
- Media Temperature (Minimum)
- 40 Degrees F
- Priming
- Manual
- Duty Cycle
- Continuous
- Frequency
- 60 Hz
- Flow Rate @ 40 ft of Head (Maximum)
- 5 gpm
- Flow Rate @ 5 ft of Head (Maximum)
- 35.5 gpm
- For Use With Potable Systems
- No
- Flow Rate @ 1 ft of Head (Maximum)
- 36.5 gpm
- Flow Rate (Minimum)
- 5 gpm
- Horsepower
- 1/2 hp
- Feet of Head (Minimum)
- 0 ft
- Ambient Temperature - Maximum
- 104 Degrees F
- Motor Design
- Three-Phase
- Chemical Compatibility
- Non-Abrasive Liquids, Non-Flammable Liquids
- Mounting Orientation
- Horizontal
- Pump Design
- End Suction
- Media Temperature - Maximum
- 200 Degrees F
- Motor Speed - Maximum
- 3,450 RPM
- Shut Off Pressure - Maximum
- 150 psi
- Case Pressure - Maximum
- 150 psi
- Drive Coupling Type
- No Coupling
- Media Temperature - Minimum
- 40 Degrees F
- Discharge Orientation
- Side
- Shaft Seal Material
- Carbon/Ceramic, FKM, Stainless Steel
- Discharge Position
- Offset
- Hazardous Location Class
- Not Rated
- NPSHr
- 1.95 ft
- Discharge Rotation Increments
- 90 Degrees
- Full Load Current
- 3.0-2.8/1.4
- Flow Rate @ 10 ft of Head - Maximum
- 34 gpm
- Pump Housing Material
- Stainless Steel
- Thermal Overload Protection
- No
- Number of Stages
- 1
- Shaft Seal Type
- Mechanical
- Inlet Position
- Center
- Ambient Temperature - Minimum
- 40 Degrees F
- Inlet Orientation
- Side
Create Account
