- MFR #
- 4UA67
- Zoro #
- G1707544
- UPC #
- 190735334744
- Country of Origin
- India
- Item
- Centrifugal Pump
- Item - Self Priming Pumps
- Self Priming Centrifugal Pump
- HP - Pumps
- 1/2 hp
- Inlet
- 1-1/2 in NPT
- Voltage - Pumps
- 115/230V AC
- Outlet
- 1-1/2 in NPT
- HP
- 1/2
- Phase - Pumps
- 1
- Wetted Materials
- Buna-N, Carbon, Cast Iron, Ceramic
- Max. Head - Pumps
- 78 ft
- Voltage
- 115/230
- Volute Material
- Cast Iron
- Seal Material
- Buna-N, Carbon, Ceramic
- Best Efficiency Range GPM @ Head
- 18 to 38 gpm @ 60 to 40 ft
- Suction Lift
- 20 ft.
- Max. Pressure - Pumps
- 33 psi
- Motor RPM
- 3,500 RPM
- Motor Enclosure - Pumps
- Open Dripproof
- Housing Material - Pumps
- Cast Iron
- Duty - Pumps
- Continuous
- GPM of Water @ 30 Ft. of Head
- 45
- Hz
- 60 Hz
- Max. Case Pressure
- 165 psi
- Phase
- Single
- Amps
- 8.4/4.8
- GPM of Water @ 20 Ft. of Head
- 49
- Motor Type
- Single Phase
- Max. Head
- 78 ft.
- Motor Enclosure
- Open Drip Proof
- Max. Pressure
- 33.7 psi
- Bearing Type
- Ball
- Agency Compliance
- c UL us
- Frame
- 56J
- Port Rotation - Pumps
- No
- Port Rotation
- No
- GPM of Water @ 40 Ft. of Head
- 38
- Max. Liquid Temp.
- 200 Degrees F
- Motor Design
- Capacitor-Start
- Housing Material
- Cast iron
- GPM of Water @ 15 Ft. of Head
- 51
- Self-Priming
- Yes
- Inlet Pressure
- 100 psi
- Max. Temp - Pumps
- 200 Degrees F
- Duty
- Continuous
- Suction Lift - Pumps
- 20 ft
- Max. Specific Gravity
- 1.0
- Impeller Material
- Cast Iron
- GPM of Water @ 50 Ft. of Head
- 28
- Includes
- Manual
- Impeller Type
- Semi Open
- GPM of Water @ 10 Ft. of Head
- 53
- Standards
- UL Recognized Motor
- Shaft Material
- Stainless Steel
- Seal Type
- Mechanical
- Motor Frame Designation
- 56J
- Best Efficiency Head
- 60 ft
- Flow Rate @ 30 ft of Head (Maximum)
- 36 gpm
- Horsepower
- 1/2 hp
- Intake Type
- NPT
- Discharge Type
- NPT
- Best Efficiency Flow
- 38 gpm
- Suction Lift (Maximum)
- 20 ft
- Flow Rate @ 60 ft of Head (Maximum)
- 10 gpm
- Specific Gravity (Maximum)
- 1
- Flow Rate @ 20 ft of Head (Maximum)
- 44 gpm
- Frequency
- 60 Hz
- Flow Rate @ 40 ft of Head (Maximum)
- 28 gpm
- For Use With Potable Systems
- No
- Flow Rate @ 15 ft of Head (Maximum)
- 48 gpm
- Shut Off Pressure (Maximum)
- 33 psi
- Maximum RPM
- 3,500 RPM
- Impeller Design
- Semi-Open
- Wetted Material
- Buna-N, Carbon, Cast Iron, Ceramic
- Flow Rate @ 50 ft of Head (Maximum)
- 18 gpm
- Minimum Media Temperature
- 40 Degrees F
- Nameplate Voltage
- 115/230V AC
- Flow Rate @ 10 ft of Head (Maximum)
- 54 gpm
- Maximum Feet of Head
- 78 ft
- Duty Cycle
- Continuous
- Pump Housing Material
- Cast Iron
- Drive Coupling Type
- No Coupling
- Discharge Orientation
- Top
- Feet of Head (Minimum)
- 10 ft
- Priming
- Self-Priming
- Full Load Current
- 9.6/4.8 A
- Flow Rate (Maximum)
- 52 gpm
- Mounting Orientation
- Horizontal
- Inlet Orientation
- Side
- Number of Stages
- 1
- Viscosity (Maximum)
- 100 SUS
- Motor Speed - Maximum
- 3,450 RPM
- Suction Lift - Maximum
- 20 ft
- Flow Rate (Minimum)
- 10 gpm
- Shaft Seal Material
- Buna-N, Carbon/Ceramic
- Thermal Overload Protection
- Yes
- Hazardous Location Class
- Not Rated
- Media Temperature - Maximum
- 180 Degrees F
- Inlet Position
- Center
- Flow Rate @ 10 ft of Head - Maximum
- 54 gpm
- Shut Off Pressure - Maximum
- 33 psi
- Case Pressure - Maximum
- 100 psi
- Shaft Seal Type
- Mechanical
- Ambient Temperature - Maximum
- 40 Degrees C
- Discharge Position
- Center
- Electrical Connection Type
- Hardwired
- Pumping Application
- Chemical Transfer, Decorative Water, Dewatering, Irrigation, Liquid Transfer
- Chemical Compatibility
- Non-Flammable Liquids
- Media Temperature - Minimum
- 40 Degrees F
- Discharge Rotation Increments
- 0 Degrees
- Feet of Head (Maximum)
- 78 ft
Create Account
