- MFR #
- 53RU55
- Zoro #
- G8093298
- UPC #
- 00194484303716
- Country of Origin
- United States
- For Use With
- 9761
- Item
- Electric Drum Pump
- Includes
- Adapter, Hose, Motor
- Max. Viscosity
- 1,500 cps
- Motor Type
- Electric AC Brush
- Power Source
- Corded Electric
- Wetted Materials
- Aluminum, Buna, Carbon Graphite, PTFE, PVC, SS316
- Voltage
- 230VAC
- Motor Enclosure
- ODP
- Metered
- No
- Motor RPM
- 0-10,000
- Max. Flow GPM
- 22 gpm
- Suction Tube Type
- 1-Piece Tube
- Hz
- 50/60
- Hose Material
- PVC
- Max. Head
- 16 ft.
- Adapter Type
- Sliding Bung with 2" Drum Thread
- Duty
- Intermittent
- Thermal Protection
- Yes
- Adapter Material
- 304 Stainless Steel
- Discharge Tubing Material
- PVC
- GPM
- 22
- Application
- To Pump a Variety of Liquids from 55-gal. Drums and Tote Tanks
- Max. Pressure
- 14 psi
- DEF Compatible
- No
- Suction Tube Material
- Aluminum
- Max. Liquid Temp.
- 175 Degrees F
- Phase
- Single
- Max. GPM for Water
- 22
- Full Load Amps
- 5.0 A
- Self-Priming
- Yes
- Agency Compliance
- CE (Motor Only)
- HP
- 1
- Housing Material
- Aluminum
- Clamp Style
- Worm
- Features
- Stainless Steel Hose Clamps
- For Container Type
- Drum
- Diesel Exhaust Fluid Compatible
- No
- Not Recommended Chemicals
Acetic Acid 20%,Acetic Acid 80%,Acetone,Ammonia Liquid,Ammonium Hydroxide,Bleach,Calcium Chloride,Chromic Acid 30%,Chromic Acid 50%,Citric Acid 50%,Concentrated Nitric Acid,Ethyl Acetate,Glacial Acetic Acid,Hydrochloric Acid 100%,Hydrochloric Acid 20%,Hydrochloric Acid 37%,Hydrofluoric Acid 100%,Hydrofluoric Acid 20%,Hydrofluoric Acid 75%,Isopropanol,Lacquer Thinners,Methanol,Methyl Ethyl Ketone,Nitric Acid 10% Solution,Nitric Acid 20% Solution,Nitric Acid 50% Solution,Phosphoric Acid 40% Solution,Potassium Hydroxide 50%,Sodium Hydroxide 20%,Sodium Hydroxide 50%,Sulfuric Acid 10% to 75%,Sulfuric Acid 75% to 100%,Toluene,Trichlorethylene 50%,Xylene
- Compatible Chemicals
- Antifreeze (Coolant), Deionized Water, Ethylene Glycol, Fresh Water, Glycerin, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Motor Oil, Salt Water, Sodium Bicarbonate (10%)
- Spout Connection Type
- Hose Barb
- Max. Flow Rate
- 22 gpm
- Nozzle Material
- Aluminum
- Suction Tube ID
- 1 5/16 in
- Max. Fluid Temp.
- 175 Degrees F
- Max. Head Pressure
- 16 psi
- Discharge Tube Outlet ID
- 1 in
- Hose Tube Material
- PVC
- Suction Tube OD
- 1 5/8 in
- Includes Discharge Hose
- Yes
- Includes Spout
- Yes
- Includes Bung Adapter
- Yes
- Discharge Connection Type
- Hose Barb
- Includes Nozzle
- Yes
- Nozzle Operation
- Manual
- Noise Level
- 88 dB
- Discharge Tube Outlet OD
- 1 1/2 in
- Runs Dry
- Yes
- Hose Cover Material
- PVC
- Motor HP
- 1 1/10 hp
- Duty Cycle
- Intermittent
- Number of Phases
- 1
- Variable Speed
- Yes
- Max. Oil Flow
- 7 gpm
- Food Grade
- No
- For Media Type
- Antifreeze, Ethylene Glycol, Glycerin, Hydraulic Oil, Motor Oil, Sodium Bicarbonate, Water
- Max. Head - Pumps
- 36 ft
- Seal Material
- Sealless
- Plug Type
- CEE 7/7
- Includes Suction Tube
- Yes
- Frequency (Hz)
- 50/60 Hz
- Housing Material - Pumps
- Aluminum
- Gear Lube
- NT
- Rated Voltage
- 230 V AC
- Adapter Connection Type
- MNPT
- Grease
- NT
- Max. Outlet Pressure
- 16 psi
- Wetted Material
- 316 Stainless Steel/Aluminum/Buna-N/Carbon Graphite/PTFE/PVC
- Maximum Fluid Temperature
- 175 Degrees F
- Maximum Oil Flow
- 7 gpm
- Full Load Current
- 5 A
- Maximum Flow Rate
- 22 gpm
- Maximum Head Pressure
- 16 psi
- Adapter Connection Standard
- MNPT
- Meter Type Included
- No Meter Included
- Maximum Outlet Pressure
- 16 psi
- Frequency
- 50/60 Hz
- Motor Horsepower
- 1 1/10 hp
- Maximum Head
- 36 ft
- Maximum Viscosity
- 1,500 cps
- Standards
- CE Motor
- Chemical Compatibility
- Antifreeze Coolant, Deionized Water, Diesel Fuel, Ethylene Glycol, Fresh Water, Glycerin, Petroleum Oil, Synthetic Oil, Motor Oil, Salt Water, Sodium Bicarbonate 10%
- Motor Enclosure Design
- Open Drip Proof
- Power Source - TS Only
- Corded Electric
- Power Source - old
- Corded Electric
Create Account