- MFR #
- 25GBC20
- Zoro #
- G7010866
- UPC #
- -
- Country of Origin
- United States
- Booster Pump Type
- Multi-Stage Booster Pump
- Item
- Booster Pump
- HP - Pumps
- 2 hp
- Voltage - Pumps
- 120/240V AC
- Phase - Pumps
- 1
- Number of Stages - Pumps
- 10
- Max. Pressure - Pumps
- 75 psi
- Housing Material - Pumps
- Cast Iron
- Motor Enclosure - Pumps
- Open Dripproof
- Voltage
- 115-230
- GPM @ 10 PSI
- 39
- Amps
- 18.8/10.2-9.4 A
- Inlet
- 1" FNPT
- Motor Ambient Temp. Rating
- 40 Degrees C
- GPM @ 40 PSI
- 33.5
- Motor RPM
- 3,450 RPM
- HP
- 2
- Duty
- Continuous
- GPM @ 100 PSI
- 21
- Stages
- 10
- GPM @ 80 PSI
- 24
- Housing Material
- Cast iron
- Motor Enclosure
- Open Dripproof (ODP)
- Phase
- Single
- Bearing Type
- Ball
- Outlet
- 1" FNPT
- Max. Case Pressure
- 260 psi
- Motor Type
- Capacitor-Start
- Max. Pressure
- 75 psi
- Max. Liquid Temp.
- 160 Degrees F
- Wetted Materials
- Buna, Carbon, Cast Iron, Ceramic, Engineered Composite, Stainless Steel
- Frame
- 56J
- GPM @ 60 PSI
- 31
- Seal Material
- Buna-N/Carbon/Ceramic
- Impeller Material
- Glass Filled Polycarbonate
- GPM @ 20 PSI
- 37
- Pump Mounting Position
- Horizontal
- Hz
- 60 Hz
- GPM @ 120 PSI
- 15
- Impeller Type
- Closed
- Agency Compliance
- CSA/UL/CE
- Frequency
- 60 Hz
- Discharge Type
- NPT
- Maximum Media Temperature
- 160 Degrees F
- Feet of Head (Minimum)
- 10 ft of head
- Case Pressure (Maximum)
- 186 psi
- Intake Type
- NPT
- Flow Rate @ 30 psi
- 36 gpm
- Flow Rate @ 40 psi
- 33.5 gpm
- Pumping Application
- Booster Service, Evaporative Cooling Systems/Misters, Filtration, General Purpose Pumping, HVAC, Reverse Osmosis, Spray Systems, Water Circulation
- Flow Rate @ 60 psi
- 31 gpm
- Flow Rate @ 15 psi
- 38 gpm
- Series Family
- 25GB
- Series
- GB
- Nameplate Voltage
- 115/230V AC
- Mounting Orientation
- Horizontal
- Flow Rate @ 120 psi
- 15 gpm
- Maximum Feet of Head
- 304 ft of head
- Flow Rate @ 10 psi
- 38 gpm
- Maximum Flow Rate
- 33 gpm
- For Use With Potable Systems
- No
- Minimum Flow Rate
- 8 gpm
- Horsepower
- 2 hp
- Flow Rate @ 20 psi
- 37 gpm
- Flow Rate @ 90 psi
- 22.5 gpm
- Wetted Material
- Buna, Carbon, Cast Iron, Ceramic, Stainless Steel
- Flow Rate @ 50 psi
- 32.5 gpm
- Duty Cycle
- Continuous
- Shut Off Pressure (Maximum)
- 75 psi
- Motor Ambient Temperature (Minimum)
- 40 Degrees F
- Number of Stages
- 10
- Motor Ambient Temperature (Maximum)
- 104 Degrees F
- Standards
- CAN 22.2, CSA Certified, UL778
- Compatible with Media Type
- Water
- Impeller Design
- Closed
- Motor Frame Designation
- 56J
- Flow Rate @ 80 psi
- 24 gpm
- Maximum RPM
- 3,500 RPM
- Flow Rate @ 100 psi
- 21 gpm
- Pump Housing Material
- Cast Iron
- Flow Rate @ 70 psi
- 29 gpm
- Pump Casing Material
- Cast Iron
- Motor Ambient Temperature - Maximum
- 104 Degrees F
- Media Temperature - Maximum
- 160 Degrees F
- Pump Technology
- Centrifugal
- Thermal Protection
- Auto
- Flow Rate - Minimum
- 8 gpm
- Revolutions Per Minute - Maximum
- 3,500 RPM
- Shut Off Pressure - Maximum
- 75 psi
- Flow Rate - Maximum
- 33 gpm
- Motor Ambient Temperature - Minimum
- -50 Degrees F
- Motor Design
- Capacitor-Start
- Installation
- Floor Standing
- Case Pressure - Maximum
- 186 psi
- Full Load Current
- 18.8/10.2-9.4 A
- Electrical Connection Type
- Plug-In
- Priming
- Manual
- Discharge Standard
- NPT
- Feet of Head - Minimum
- 10 ft
- Application
- Pressure Wash, Reverse Osmosis, Evaporative Cooling Systems, Booster Service, Spray Systems, water Circulaion, Filtration, HVAC
- Suction Lift - Maximum
- 10 ft
- Feet of Head - Maximum
- 304 ft
- Motor Enclosure Design
- Open Drip Proof
- Inlet Standard
- NPT
Create Account
