Pin & Slve Plug, 60A, 4P, 3W, 600VAC/250VDC

The HUBBELL Pin & Sleeve Plug, 60A, 4P, 3W is an electrical connector intended for industrial and commercial applications. This plug supports up to 60 amps at 600V AC or 250V DC and features a straight connection orientation with screw terminals. Its octagonal body style facilitates handling during connection or disconnection, while the copper-free aluminum housing with baked powder epoxy/polyester finish offers durability in harsh conditions.

Key Features of the HUBBELL Pin & Sleeve Plug:

• Amperage/Voltage Rating: Rated for 60 A, compatible with up to 600V AC or 250V DC circuits


• Poles/Wires: Three poles and three wires configuration


• NEMA Enclosure Rating: Type 4X when mated with VersaMate receptacle and locking ring tightened; suitable for indoor/outdoor use including wet, cold, hazardous, corrosive, and marine locations


• Hazardous Location Specification: Classified for Class I Divisions 1 & 2 Groups A-D applications


• Material/Finish: Copper-free aluminum housing with electrostatically applied epoxy powder finish improves resistance to corrosion


• Wire Size Compatibility: Accepts wire sizes from #6 AWG to #2 AWG via box terminals with screw terminals/funneled entry chambers guide stripped wires into position during installation


• Cable Entry/Grommet Range: Accommodates cable diameters from 0.65" to 1.50"


• Insulator Strength: Insulators constructed for mechanical and dielectric strength under specified loads improve reliability under load


• Screw Terminals/Funneled Entry Chambers: Guide stripped wires into position during installation by guiding them into place effectively


• Grounding Style/Phase: Grounded (Style II), three-phase compatible design


• Casing Dimensions: Measures approximately 8.81" length x 3.68" width x face diameter of 2.25"


• Standards Compliance: CSA Certified LR111846 and UL E10757 listed product