2,500+ Results for Indicators, Indicator Holders & Accessories - Page 3
Key Features:
- Item: Magnetic-Base Indicator Holder
- Magnetic Pull (Lb.): 176
- Base Size (In.): 1-31/32 W x 2-23/64 L x 2-5/32 H
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.125 in
- Features: Three Precision Ground Magnetic Contact Surfaces; Powerful, Permanent Magnetic Base Holds Firmly to Steel or Iron Surfaces Horizontally, Vertically, Upside-Down; The Swivel Post Assembly on these Holders Provides Universal Adjustment in Both Horizontal and Vertical Planes; With Finished Wood Case
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 1 in
- Features: Stem 3/8" Dia., #4-48 UNF Thread; Standard Type; With Lug Type
Key Features:
- Item: Button Contact Point
- Features: 1/2 in Wide, Round Head
- Construction: Steel
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 1 in
- Accuracy: +/-0.002 in
Key Features:
- Item: Magnetic-Base Indicator Holder
- Magnetic Pull (Lb.): 132
- Base Size (In.): 1.97 W x 2.28 D x 2.17 H
Key Features:
- Promotion Restriction: Not eligible for promotion
- Item: Digital Indicator
- Series: Series 543
Key Features:
- Item: Split Collet
- Thread Size: 1/2-20
- Features: 0.375 in Dia Thru Hole
Key Features:
- Item: Digital Indicator
- Range: 0 in to 1 in
- Resolution: 0.01 mm, 0.0005 in
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 4 in
- Features: Large Dial Face, Lug Back, Shockproof
Key Features:
- Item: Co-Axial Indicator Set
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 0.25 in
- Features: Balanced Dial Up to 0.250, Rugged and simple unit construction with a in universally fitting in design, Sharp bezel serrations for positive grip
Key Features:
- Graduations: 0.0001 in
- Range: 0 in to 0.025 in
- Features: #4-48 UNF Thread, 3/8 in Stem
Key Features:
- Graduations: 0.0001 in
- Range: 0 in to 0.05 in
- Features: #4-48 UNF Thread, 3/8 in Stem
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 0.03 in
- Features: Balanced Dial Up to 0.030 in , Ideal For Precise Measurements in All machining, Layout and Inspection Work, Swiveling Tubular Body, Smooth, Jeweled Lever Action, Positive Reversing Switch, Finish Black Oxide
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 0.04 in
- Features: Jeweled Bearings Assure Higher Sensitivity and Accuracy; Reversible Measuring Direction; Fully Adjustable Bezel/Dial Face; Contact Point is Adjustable within 220 Degrees; Bezel is Sealed with on O-Ring to Keep Out Water/Oil
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 1 in
- Features: #4-48 UNF Thread, 3/8 in Stem
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 0.25 in
- Features: Lug Back
Key Features:
- Item: Magnetic-Base Indicator Holder
- Magnetic Pull (Lb.): 85
- Base Size (In.): 2W x 2-1/2H
Key Features:
- Item: Universal Dovetail Attachment
- Rod Dia. (In.): 0.25
- Construction: Steel
Key Features:
- Item: Inductive Probe with Cable
- Series: Maxum III
- Range: -0.040 to 0.040 in/-1 to 1 mm
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.03 in
- Features: Balanced Dial Up to 0.030 in, Contact point reverses automatically always maintaining clockwise hand rotation, Satin chrome finish
Key Features:
- Promotion Restriction: Not eligible for promotion
- Item: Digital Indicator
- Series: Series 543
Key Features:
- Features: On/Off Switch, Sliding Ring w/Locking Screw, Throat Depth 5 in, Vertical Capacity 9 1/4 in
- Finish: Unfinished
- Includes: Indicator Holding Attachment
Key Features:
- Item: Magnetic-Base Indicator Holder
- Magnetic Pull (Lb.): 132
- Base Size (In.): 1.97 X 2.36
Key Features:
- Promotion Restriction: Not eligible for promotion
- Item: Backlit Digital Indicator
- Series: Series 543
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.03 in
- Features: Jeweled bearings, Glare-free crystal with scratch-resistant coating, Water and dust resistant, No-clutch structure
Key Features:
- Range: 0 in to 3 in
- Graduations: 0.001 in
- Features: Revolution Counting Hand, Rugged and simple unit construction with a in universally fitting in design, Sharp bezel serrations for positive grip
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 2 in
- Features: Revolution Counting Hand, Rugged and simple unit construction with a in universally fitting in design, Sharp bezel serrations for positive grip
Key Features:
- Features: Rotary On/Off Switch; Post Snug with Two 3/4"/19mm Holes Positions the Dial Indicator at any Height, Vertical Angle and Allows for 360 Degree Rotation of the Gage Rod
- Finish: Black
- Includes: and Thread Adapter, Gage Rod with Clamp and Fine Adjust, Snug, Upright Post Assembly Including Post, without Case
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 2 in
- Features: #4-48 UNF Thread, 3/8 in Stem
Key Features:
- Color: Black, Silver & Blue
Key Features:
- Range: 0 in to 1 in
- Features: -1
- Accuracy: +/-0.00012 in; +/-0.003 mm
Key Features:
- Graduations: 0.001 in
- Range: 0.1 in
- Features: Continuous Dial Up to 0.200
About Indicators, Indicator Holders & Accessories
Indicators, Indicator Holders & Accessories are precision measurement tools used to accurately measure and inspect parts in a variety of industries. They are commonly used for inspecting parts for quality control purposes or to ensure accuracy during manufacturing processes.
Types of Indicators, Indicator Holders & Accessories
The most common types of indicators are dial test indicators, digital readouts, and lever-style indicators. Dial test indicators measure very small distances using a needle that moves against a dial face. Digital readouts display measurements on an LCD screen and can be connected to computers for further analysis. Lever-style indicators use levers instead of needles to measure distances.
Materials used for Indicators, Indicator Holders & Accessories
Indicators, indicator holders & accessories can be made from different materials such as steel, aluminum alloy, plastic or ceramic. The material chosen depends on the application and environment in which it will be used. Steel is the most durable material but is also more expensive than other materials.
Industries that use Indicators, Indicator Holders & Accessories
Indicators are commonly used in industries such as automotive manufacturing and aerospace engineering where precise measurements are required. Professionals working in these industries rely on indicators to ensure accuracy when creating parts or inspecting them for quality control purposes.
Find the Indicators, Indicator Holders & Accessories You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of tools & machining along with other tools or supplies to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.