2,500+ Results for Indicators, Indicator Holders & Accessories - Page 5
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.03 in
- Features: Dovetail Mounting
Key Features:
- Item: Radius Contact Point
- For Use With: AGD Indicator
- Features: 13/64 in Knurled Dia, Rounded End
Key Features:
- Item: Magnetic-Base Indicator Holder
- Magnetic Pull (Lb.): 70
- Base Size (In.): 13-5/32 W x 19-5/32 L x 13-5/64 H
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.03 in
- Features: Jeweled Bearings, Glare Free Scratch Resistant Crystal, Finish Satin Chrome
Key Features:
- Item: Radius Contact Point
- Thread Size: 4-48
- Features: 13/64 in Knurled Dia, Rounded End
Key Features:
- Item: Magnetic-Base Indicator Holder
- Magnetic Pull (Lb.): 132
- Base Size (In.): 1-31/32 W x 2-3/8 D x 2-11/64 H
Key Features:
- Graduations: 0.01 mm
- Range: 0 mm to 0.8 mm
- Features: Three Dovetail Positioning Mounts Work with Most Existing Test Indicator Accessories; Precision Gear-Driven Design with Smooth, Jeweled Movement; Contact Point Reverses Automatically, always Maintaining Clockwise Hand Rotation; Contacts are Frictionally Adjustable and Replaceable; Meets or Exceeds ANSI/ASME Accuracy Specifications; Narrow Body for in Reach Ability; Durability
Key Features:
- Item: Kit 0.03" Test Indicator,w/0.0005" Re
Key Features:
- Item: Dial Indicator Lever Assembly
- Thread Size: 4-48
- Features: Used in Place of Stem Cap, Can Be Used in Right or Left Hand Position
Key Features:
- Graduations: 0.002 mm
- Range: 0 mm to 0.2 mm
- Features: Performs Easy and Accurate Measurement; No-Clutch Structure for Automatic Reversal of Measuring Direction; One-Piece Bezel and Crystal Design with O-Ring Provide Resistance to Water and Dust; High Sensitivity and Quick Response; Glare-Free Flat Crystal Face has a Scratch-Resistant Coating
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 1 in
- Accuracy: +/-0.001 in
Key Features:
- Item: Universal Test Indicator Holder
Key Features:
- Promotion Restriction: Not eligible for promotion
- Item: Digital Indicator
- Series: Series 543
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.5 in
- Features: Rugged and Simple Unit Construction, Universal Fitting Design, Sharp Bezel Serrations for Positive Grip, Unbreakable Crystal, Hardened Stainless Steel Stem, No-Glare Satin Finish Case, Hardened Stainless Steel Rack and Spindle, Massive Bridge for Rigid Bearing Support, Hardened Stainless Steel Gears and Pinions, Non-Reflecting Eggshell Finish Dial
Key Features:
- Item: Bell Contact Point
- Construction: Steel
- Overall Length (In.): 3/8
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 1 in
- Accuracy: +/-0.001 in
Key Features:
- Graduations: 0.002 mm
- Range: 0 mm to 0.2 mm
- Features: High Sensitivity and Quick Response, No-Clutch Structure for Automatic Reversal of Measuring Direction
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 1 in
- Features: Allows Very Precise Measurement for Automotive Repair; Used to Set Proper Distance or Alignment; Enables Measuring Fixture to be Secured to Any Available Surface; Highly Flexible Configuration
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.06 in
- Features: Anti-Magnetic; Jeweled Bearings; Glare Free Scratch Resistant Crystal Resistant, Water Resistant and Dust Resistant
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 1.25 in
- Features: 3/8 in Shank, 4 in Between Contact Points
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 1 in
- Features: Continuous Dial Up to 1.000, Rugged and simple unit construction with a in universally fitting in design, Sharp bezel serrations for positive grip
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 0.25 in
- Features: 3/8 in Shank, 4 in Between Contact Points
Key Features:
- Item: Dial Test Indicator Stylus
- Rod Dia. (In.): 0.080
- Construction: Chrome
Key Features:
- Graduations: 0.001 mm
- Range: 0 to 1 mm
- Features: The Stem Spindle is Made of High-Strength Quench-Hardened Stainless Steel Which Resists Strenuous Use; The Grand Gear Uses Stainless Steel that is Resistant to Wear and Deformation; Application of a Hard Coating on the Surface of the Crystal Makes the Gauge Highly Scratch-Resistant and Chemical-Resistant; Stem Dia. 8mm M2.5 x 0.45 Thread; Flat-Back; Shockproof Type
Key Features:
- Graduations: 0.0001 in
- Range: 0 in to 0.025 in
- Features: 3/8 in Mounting Stem, Controlled Mesh of Rack and Pinion, Hardened Gears and Stainless Steel Rack, Positive Pressure Pull Back Spring, Shatter-Proof Curved Crystal Lens
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.06 in
- Features: Smooth Spindle Movement for Increased Measuring Accuracy, Water and Dust Resistant
Key Features:
- Item: Radius Contact Point
- Overall Length (In.): 5/32
- For Use With: AGD Indicator
Key Features:
- Graduations: 0.001 in
- Range: 0 in to 0.03 in
- Features: Anti Magnetic Body
Key Features:
- Item: Lbs Pull Magnetic Base,w/Fine Adjust
Key Features:
- Graduations: 0.0005 in
- Range: 0 in to 0.03 in
- Features: Performs Easy and Accurate Measurement; No-Clutch Structure for Automatic Reversal of Measuring Direction; One-Piece Bezel and Crystal Design with O-Ring Provide Resistance to Water and Dust; High Sensitivity and Quick Response; Glare-Free Flat Crystal Face has a Scratch-Resistant Coating
Key Features:
- Item: Precision Centering Indicator 0.0005"
About Indicators, Indicator Holders & Accessories
Indicators, Indicator Holders & Accessories are precision measurement tools used to accurately measure and inspect parts in a variety of industries. They are commonly used for inspecting parts for quality control purposes or to ensure accuracy during manufacturing processes.
Types of Indicators, Indicator Holders & Accessories
The most common types of indicators are dial test indicators, digital readouts, and lever-style indicators. Dial test indicators measure very small distances using a needle that moves against a dial face. Digital readouts display measurements on an LCD screen and can be connected to computers for further analysis. Lever-style indicators use levers instead of needles to measure distances.
Materials used for Indicators, Indicator Holders & Accessories
Indicators, indicator holders & accessories can be made from different materials such as steel, aluminum alloy, plastic or ceramic. The material chosen depends on the application and environment in which it will be used. Steel is the most durable material but is also more expensive than other materials.
Industries that use Indicators, Indicator Holders & Accessories
Indicators are commonly used in industries such as automotive manufacturing and aerospace engineering where precise measurements are required. Professionals working in these industries rely on indicators to ensure accuracy when creating parts or inspecting them for quality control purposes.
Find the Indicators, Indicator Holders & Accessories You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of tools & machining along with other tools or supplies to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.