Full Body Harness with SRL independent web connector | Adjustable Grommets and 3 D-Rings

The Ironwear 2126 full-body harness meets ANSI Z359.11 standards, with 3 aluminum D-rings at the back and sides, as well as a mating buckle front closure, all supporting up to a 310 lb capacity. This harness is made of durable polyester webbing and features an independent SRL web connector under the dorsal D-ring that allows for expanded connection options. Adjustment points are built into the shoulder, chest and leg straps that allow any user to adjust the fit to the desired comfort level, including grommets in the leg straps for improved support.
Designed specifically for industrial use, this harness can be adapted to a wide range of fall-arrest systems. It is not approved for use in any non-occupational applications.
To clean, use a sponge with a hard side and wash with warm water and mild soap, then rinse and leave to air dry. Remove any padding, if possible. Be sure to clean between any grommets and buckles. Avoid submerging the in water or cleaning solution by hanging the harness on or draping it over a sturdy base (so that it does not touch the ground) during cleaning. Do NOT machine wash or dry. Do NOT use aggressive cleaning solutions such as bleach or acetone. Employing any methods other than those recommended above may compromise the quality of the harness, resulting in performance below advertised standards.