Makita 9031

Grind, deburring, sand and surface finish metal pipe, angle iron, fiberglass and wood. Getting into awkward tight areas is best suited for the 1/2 in. x 18 in. arm of this Milwaukee band file. 5.5 amp, 2, 300 SSFPM, AC only. The head of the file can be adjusted 180 degrees. This body grip tool offers a single hand on/off paddle switch and a three position side handle. Milwaukee also offers a full line of band file belts for extended wear under the toughest conditions.

Pipe Surface Polisher, Belt Size 1-1/2 x 30 In., 8 Amps @ 120V, Tool Weight 10 lb., Lock-on Yes, Lock-off Yes, Tool Length 21-1/2 In., Includes Coarse Belt

Belt Sander, Belt Size (In.) 3/8 x 21 In., 980-5600 No Load SFPM, 4.4 A Amps @ 120V, Ball Bearings, 16.4 Cord, Lever Release Type, Flush Wall Sanding, Auto Tracking Belt, Low Noise, Tool Weight (Lb.) 3.5 lb., Tool Length (In.) 16-1/2 In., Includes Dust Bag, Sanding Belt

Pipe Surface Polisher, Size 1 1/4 in x 21 in, No Load RPM 2700 to 7000, Amps 11 A, Cord 13 ft, Features 110 Volt, 1200 Watts contact Pipe Polisher for Stainless Steel Pipe Up To 1-3/4 in, Self-Start Lock, Bearings Ball, Tool Length 19 in, Handle Design Barrel Grip, Speed Type Variable, Includes Sanding Belts: 13/16 x 32-1/16, (10) Ea: Grits 120 And 180, Sanding Belts: 1-9/16 x 32-1/16 in , (10) Ea: Grits 120 And 180, (5) Fleece Belts: 13/16 x 32-5/16 in Very Fine 280 Grit, And Metal Tool Case

Wide Mouth Adjustable Wrench, Chrome, 8

Cordless Band File, Voltage 18.0 V, Battery Included / Bare Tool Bare Tool, Belt Size 1/4 in to 3/4 in W x 18 in L, No Load SFPM 1, 575, Bearings Double Sealed, Handle Type Body Grip, Release Type Switch, Lock-on Yes, Lock-off Yes

Basic Pipe Polishing Kit, Works With For Use With 10F025 Polisher, For Polishing Round Tube, Surface Cleaning, Scratch Removal, For Use With 10F025 Polisher, For Polishing Round Tube, Surface Cleaning, Scratch Removal, Includes Includes (10) Sanding Belts 13/16 x 32-1/16 in Grits 120 And 180, (10) Sanding Belts 1-9/16 x 32-1/16 in Grit 120 And 180, (5) Fleece Belts 13/16 x 32-1/16 in Very Fine

Air File Sander, 85800

Tube/Pipe Polishing Module, Industrial, Material Steel, Works With GI 150, GI 150 2H, GI 150 2H 2V, GI 150 2V, GI 75 2H, GI 75 2H 2V, GI 75 2V, GIB, GILS 2V, Mfr. No. GXW, Dia. (In.) 5 in, For Polishing All Tube and Pipe Including Mild and Stainless Steel, May Also Be Used for Copper, Brass and Other Materials

Cordless Combination Kit, Cordless Tools Included Angle Grinder, Blower, (2) Circular Saws, (2) Flashlights, Hammer Drill, Impact Driver, (2) Impact Wrenches, Radio, Reciprocating Saw, Rotary Hammer, Screw Gun, Right Angle Drill, Voltage 18V DC, Power Source Cordless, Number of Tools 15, Battery Capacity (4) 3.0 Ah, Includes (15) Cordless Tools, (2) Chargers, (2) Contractor Bags, (4) Batteries, Tool Brand Makita, Series 18V LXT, Battery Included Yes, Number of Batteries Included 4

Belt/Disc Sander, 1/3 HP, Voltage 120, 3.5 Amps AC, 1 Phase, 60 Hz, Disc Dia. (In.) 6, Disc Speed (RPM) 3500, Belt Size (In.) 2 x 42 and 1 x 42, Belt SFPM 4400, Idler Drum Size (In.) -, Disc Table Size (In.) 5-1/2 x 8-1/4, Table Work Surface (In.) 6-3/4 x 9, Disc Table Tilt-In Angle (Deg.) 0, Disc Table Tilt-Out Angle (Deg.) 45, Belt Table Tilt Angle (Deg.) 0 to 90, Platen Size (In.) 6 5/8 X 16 7/8, Dust Collection Port Size (In.) 1-1/2, Table Material Cast Aluminum, Overall Width (In.) 13