Customer Service From Real People.

We’re here to help! Call (855) 289-9676
Cart

Twist Drill Set

We have the twist drill set you need to get the job done right.

Featured Product

HSS Jobber Drill Set, Bright
$240.09
  • This Precision Twist C115COMBP jobber length drill bit set contains 115 high-speed steel drill bits, including inch sizes 1/16" through 1/2" in 1/64" increments, one each of wire gauge sizes #60 through #1, and one each of letter sizes A through Z, with an uncoated (bright) finish and a 118-degree conventional point for use in general-purpose applications on a range of materials, especially soft metals. High-speed steel (HSS) provides hardness for wear resistance, and the uncoated (bright) finish provides an untreated surface. These jobber length drill bits have a drilling depth up to four times their diameter. The round shank accommodates most drill chucks. The set comes in a metal index case with labeled compartments for identification and organization. Drill bits conform to American National Standards Institute (ANSI) standards.Drill bits are cutting tools used to make holes in a range of materials using machines such as handheld portable drills, machining centers, and lathes. Drill bits come in a variety of lengths and types, the most common of which is the twist drill bit. The round, twisted shaft of the twist drill bit typically has two cutting edges and flutes. The helical twist of the flutes brings chips up and away from the cutting edges and allows for coolant to reach the cutting edges. Jobber length twist drill bits, the most common length of twist drill bit, offer a good compromise of length and reach to work with the widest range of materials and applications. Mechanic's length twist drill bits (also called maintenance length) are a little shorter than jobber length and less prone to deflection when drilling. Short length twist drill bits (also called stub or screw-machine length) are the shortest and stiffest twist drill bits, helping to reduce the chance of deflection or breakage when drilling. Reduced shank drill bits (also called Silver and Deming drill bits) have a shank that is smaller in diameter than its shaft, permitting drilling machines with either a 1/2" or 3/4" drill chuck to create large holes. Long length twist drill bits (also called taper length) are a little longer than jobber length, allowing for deeper holes and longer reach. Extra long twist drill bits (also called extension) are longer than long length twist drill bits for greater reach or for drilling deeper holes.What’s in the Box?115 drill bits, inch sizes 1/16" through 1/2" in 1/64" increments, one each of wire gauge sizes #60 through #1, and one each of letter sizes A through ZMetal case

  • View Full Product Details

Shop Twist Drill Set

  • 19pc. HSS 118 Degrees Drill Bit Set
    $34.78
    • Jobber drill bits come in 4 different measurement systems, fractional, number and letter, mechanical and wire. Take a look at the features for this Twist Drill Set, 19 pcs. : DRILL BIT SIZE: 1.00mm; 1.50mm; 2.00mm; 2.50mm; 3.00mm; 3.50mm; 4.00mm; 4.50mm; 5.00mm; 5.50mm; 6.00mm; 6.50mm; 7.00mm; 7.50mm; 8.00mm; 8.50mm; 9.00mm; 9.50mm; 10.00mm, DRILL BIT MATERIAL: High Speed Steel, DRILL BIT DIMENSION TYPE: Metric

    • View Full Product Details

  • HSS Stub Drill Set,Bright,Short
    $121.35
    • The Precision Twist C29R40 short length drill bit set contains 29 high-speed steel drill bits, including inch sizes 1/16" through 1/2" in 1/64" increments, with an uncoated (bright) finish and a 118-degree conventional point and provides increased rigidity in heavy feed-rate drilling applications on a variety of materials, especially soft metals. High-speed steel (HSS) provides hardness for wear resistance, and the uncoated (bright) finish provides an untreated surface. These short length drill bits have a drilling depth of up to 2.5 times their diameter. The round shank accommodates most drill chucks. The set comes in a metal index case with labeled compartments for identification and organization. Drill bits conform to American National Standards Institute (ANSI) standards.Drill bits are cutting tools used to make holes in a range of materials using machines such as handheld portable drills, machining centers, and lathes. Drill bits come in a variety of lengths and types, the most common of which is the twist drill bit. The round, twisted shaft of the twist drill bit typically has two cutting edges and flutes. The helical twist of the flutes brings chips up and away from the cutting edges and allows for coolant to reach the cutting edges. Jobber length twist drill bits, the most common length of twist drill bit, offer a good compromise of length and reach to work with the widest range of materials and applications. Mechanic's length twist drill bits (also called maintenance length) are a little shorter than jobber length and less prone to deflection when drilling. Short length twist drill bits (also called stub or screw-machine length) are the shortest and stiffest twist drill bits, helping to reduce the chance of deflection or breakage when drilling. Reduced shank drill bits (also called Silver and Deming drill bits) have a shank that is smaller in diameter than its shaft, permitting drilling machines with either a 1/2" or 3/4" drill chuck to create large holes. Long length twist drill bits (also called taper length) are a little longer than jobber length, allowing for deeper holes and longer reach. Extra long twist drill bits (also called extension) are longer than long length twist drill bits for greater reach or for drilling deeper holes.What’s in the Box?29 drill bits, inch sizes 1/16" through 1/2" in 1/64" incrementsMetal case

    • View Full Product Details

  • HSS Jobber Drill Set, Bright
    $90.26

  • Drill Bit Set,Titanium,21 pcs.
    $29.94

  • HSS-E Stub Drill Set,Bright,Short
    $116.55
    • This Precision Twist C60R41 short length drill bit set contains 60 high-speed steel drill bits, including one each of wire gauge sizes #60 through #1, with an uncoated (bright) finish and a 118-degree conventional point for increased rigidity in heavy feed-rate drilling applications on a variety of materials, especially soft metals. High-speed steel (HSS) provides hardness for wear resistance, and the uncoated (bright) finish provides an untreated surface. These short length drill bits have a drilling depth of up to 2.5 times their diameter. The round shank accommodates most drill chucks. The set comes in a metal index case with labeled compartments for identification and organization. Drill bits conform to American National Standards Institute (ANSI) standards.Drill bits are cutting tools used to make holes in a range of materials using machines such as handheld portable drills, machining centers, and lathes. Drill bits come in a variety of lengths and types, the most common of which is the twist drill bit. The round, twisted shaft of the twist drill bit typically has two cutting edges and flutes. The helical twist of the flutes brings chips up and away from the cutting edges and allows for coolant to reach the cutting edges. Jobber length twist drill bits, the most common length of twist drill bit, offer a good compromise of length and reach to work with the widest range of materials and applications. Mechanic's length twist drill bits (also called maintenance length) are a little shorter than jobber length and less prone to deflection when drilling. Short length twist drill bits (also called stub or screw-machine length) are the shortest and stiffest twist drill bits, helping to reduce the chance of deflection or breakage when drilling. Reduced shank drill bits (also called Silver and Deming drill bits) have a shank that is smaller in diameter than its shaft, permitting drilling machines with either a 1/2" or 3/4" drill chuck to create large holes. Long length twist drill bits (also called taper length) are a little longer than jobber length, allowing for deeper holes and longer reach. Extra long twist drill bits (also called extension) are longer than long length twist drill bits for greater reach or for drilling deeper holes.What’s in the Box?60 drill bits, one each of wire gauge sizes #60 through #1Metal case

    • View Full Product Details

  • 29pc. HSS 135 Deg. Jobber Drill Bit Set
    $88.50
    • Jobber Drill Bit Set, Cutting Direction Right Hand, Drill Bit Material High Speed Steel, Drill Bit Dimension Type Fractional Inch, Number of Pieces 29, Drill Bit Size 1/16 In.-1/2 In. by 1/64 In., Drill Bit Point Angle 135 Degrees , Drill Bit Finish Black/Gold, List Number 1878, Point Type Split Point, Shank Dia. 1/6 In.-1/2 In., Includes Metal Drill Index, Standards NAS 907 Type B, Depth:Dia. Ratio 4xD

    • View Full Product Details

  • Drill Bit Set,HSS,Assorted,Black Oxide
    $24.66

  • 29pc. Thunderbolt® Titanium Coated Drill Bit Set
    $76.52
    • The 29-piece Milwaukee Thunderbolt® titanium coated drill bit set offers convenience and heavy-duty performance on the jobsite. Milwaukee thunderbolt titanium coated drill bits are designed for extreme durability and up to 3X longer life. The thunderbolt web features a thicker core than a standard drill bit to provide ultimate strength and protect against side-load breakage. The titanium coating reduces heat build-up and keeps the bit sharp to extend performance. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. Effective for drilling on curved surfaces, Milwaukee thunderbolt titanium coated bits require less effort to drill through wood, metal and PVC, and are highly recommended for use with portable drills. The set comes in a resilient case and includes bit sizes 1/16 in., 5/64 in., 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 11/64 in., 3/16 in., 13/64 in., 7/32 in., 15/64 in., 1/4 in., 17/64 in., 9/32 in., 19/64 in., 5/16 in., 21/64 in., 11/32 in., 23/64 in., 3/8 in., 25/64 in., 13/32 in., 27/64 in., 7/16 in., 29/64 in., 15/32 in., 31/64 in., and 1/2 in.

    • View Full Product Details

  • Drill Bit Set,29 PC
    $57.11

  • 115pc. HSS 118 Degrees Drill Bit Set
    $164.39
    • Jobber Drill Bit Set, Cutting Direction Right Hand, Drill Bit Material High Speed Steel, Drill Bit Dimension Type Fractional Inch, Letter, Wire, Number of Pieces 115, Drill Bit Size 1/16 In.-1/2 In. by 1/64 In., #60-#1, A-Z, Drill Bit Point Angle 118 Degrees , Drill Bit Finish Black Oxide, Point Type Conventional Point, Shank Dia. 1/16 In. - 1/2 In. by 64ths, #1 - #60, A-Z, Standards ASME

    • View Full Product Details

  • 29 pc. Cobalt 135 Deg. Jobber Drill Set
    $186.21
    • Jobber Drill Bit Set, Cutting Direction Right Hand, Drill Bit Material Cobalt Steel, Drill Bit Dimension Type Fractional Inch, Number of Pieces 29, Drill Bit Size 1/16 In.-1/2 In. by 1/64 In., Drill Bit Point Angle 135 Degrees , Drill Bit Finish Straw/Bronze, List Number 550, Point Type Split Point, Shank Dia. 1/6 In.-1/2 In., Includes Metal Drill Index, Standards NAS 907 Type J, Depth:Dia. Ratio 4xD

    • View Full Product Details